Shopping Cart

Your cart is empty.

Your cart is empty.

09985 Pressure Canner Sealing Ring Replacement for Presto Pressure Canner - Fits Presto Pressure Cooker models 0174510, 0175510, 0175107, 0178107 (Pack of 2)

Free shipping on orders over $29.99

$15.88

$ 7 .99 $7.99

In Stock

1.Size:2pcs


2.Color:Black


About this item

  • 09985 Pressure canner sealing ring (Comes with 4 overpressure plug)
  • Pressure Cooker or Canner Gasket 09985 Compatible with Presto pressure cookers or canners. Fits into cover and forms a pressure tight seal between the cover and the body during cooking
  • Fits Model: models 0174510(16-Quart), 0175107(18-Quart), 0175510(16-Quart), 0178107( 23-Quart ), 0178209( 23-Quart ), 0178410( 23-Quart )
  • Easy to install: Wash the gasket groove thoroughly before installing, soak the pressure cooker gasket in warm water for 5 minutes to increase flexibility, insert the gasket and press it firmly into the groove
  • Note: Compatible with Presto pressure cooker models only. Please confirm whether the product size and model match your pressure cooker before purchasing



Product Description

09985
09985

  • High quality: Our pressure tank gaskets are made of high quality, durable food grade silicone.

Sealed Tightly:

Two Lines - Seep the ring on the IP lid strongly.

Small Gap - Seal lasting and keep tight.

  • The 09985 seal fits around the inside edge of the lid and creates a secure pressure seal between the lid and the body of the pressure pot during canning and cooking.
  • High temperature resistance, efficient sealing.
  • Fits Model: 0174510, 0175107, 0175510, and 0178107. Replacement for Presto 16-23qt Pressure Cooker or Canner.

Installation steps:

  1. Remove the old used seal and overpressure plug.
  2. Thoroughly clean pressure cooker seal ring grooves and overpressure plug holes.
  3. Wash the new sealing ring and overpressure plug withwarm soapy water, and then dry thoroughly. Installthe sealing ring until it is fully seated. Make sure toinstall it under the stopper and lock pin, at the inneredge of the cover.
  4. If necessary, to help make the cover easier to open and close, a very light coating of cooking oil may be applied to the underside of the body lugs and sealing ring.
  5. Install the overpressure plug, push the side of theplug (marked "TOP"), enter the opening from thebottom of the cover. The indented part of the plug canbe seen from the underside of the cover.
  6. When the lid is lightly placed on the body of the pressure cooker, press Once installed, open and close the lid a few times to make sure the ring is fully seated.
09985

Leger Rheaume
Reviewed in Canada on March 19, 2025
parfait
Mousseline
Reviewed in Canada on February 16, 2025
Bonne grandeur et belle qualité.
Customer
Reviewed in Canada on February 1, 2025
Perfect fit for older Pesto model 418, 18 liter! I thought I had to throw away the pressure canner I've used for over 40 years because Presto no longer carries the original size #33130 sealing ring- nor did they offer a new number for replacement. I learned that well used older canners metal may have stretched a bit. So definitely measure inside of lid and the canner and do not just go by the recommended number. Things to check when looking for an older model replacement sealing ring. Good quality, tight fit, and does not stick when closing or opening. These were the issues I faced when I purchased a 'recommended' sized sealing ring for my canner. Trying to use it was frightening! Ring was a bit loose in the lid, sticky to open and close lid and after one season of canning it shrunk even more and steam began to escape. The #09985 ring is a perfect replacement. No shrinkage-so far, no difficulty in opening and closing lid and most important no escaping steam! So happy I can use this good old canner for awhile longer.
D. Davis
Reviewed in the United States on August 26, 2024
When I ordered the new gauge for my canner, I figured I should probably get a new seal too. It seals really tight . Good product
Lois G
Reviewed in the United States on May 4, 2024
I purchased a pressure canner at a yard sale that needed to be rebuilt completely. These gaskets fit perfectly and sealed well.
Sonia
Reviewed in Canada on February 4, 2024
Fonctionne parfaitement et je suis très satisfaite
Karlene Dunn
Reviewed in the United States on December 18, 2024
I have a very old pressure cooker and the seal,gave out on it. I was so happy to find it on Amazon , the price was reasonable.Happy to find the seal it’s very old pressure cooker.
Customer
Reviewed in Canada on December 18, 2024
I can’t speak to the longevity of this product yet, but, it does work very well so far. The canner is used to sterilize mushroom culture medium on a regular basis and the original seals were good for a couple of years. So I am hoping that these will, at least, have the same amount of lifespan. Incidentally, remember that these canners come in different sizes … so make sure you measure yours and order the right size.
Teen
Reviewed in the United States on November 22, 2024
My old pressure cooker wasn’t sealing so thought I would give this a try (it was bubbling up at the edges and would never get up to pressure). Was so glad that it worked, I feel like if this it happened back in the day it would’ve been a real pain to find a replacement
Bonzo
Reviewed in the United States on August 24, 2023
I carefully matched the model number to my Presto pressure cooker because my old overpressure plug needed to be replaced.I installed this overpressure plug according to the instructions and it did in fact appear to be the same size and shape as the old one I replaced.While initially heating up the pressure cooker, this overpressure plug did not seal, leaked steam, and would not allow any pressure whatsoever to build up in the pot.Whatever I tried to reseat it, the plug absolutely would not hold.I returned it and ordered an OEM plug from the manufacturer, and it of course worked perfectly. But I lost two weeks.
AL NOLF
Reviewed in the United States on August 16, 2023
It's nearly canning season again, and I purchased this set again for a backup to prevent having to stop our process in the middle of operations. This Pressure Canner Sealing Ring Replacement set fits my Presto 01755 perfectly, attaches easily, and even with our hard use, lasts about a year. As stated, this is a "backup", I keep a set on hand and ready, when I install the backup - I immediately order another set to hold in "standby" for use when needed. Highly recommended,Just received my 3rd order in readiness for our next canning cycle. Nothing I can add to my original post, these are a "Must" to have on hand when the inevitable happens. I wouldn't buy anything else. Highly Recommended!
Zaako
Reviewed in the United States on October 15, 2023
The product arrived ahead of schedule, good as it's canning season.My 23 quart Presto now pressures up as fast as when it was new.I bought an off-brand last time and it only lasted about 20 uses.We'll see how durable this is.The two blow-out plugs included were nice.
cristi
Reviewed in the United States on January 17, 2023
I have used my canners a few times since replacing with the new rings and pressure plugs. Both of my canners are the same. On one the gasket and pressure plug fit perfectly well. The other canner the gasket is perfect fit. I noticed with the pressure plug it works like it is supposed to but when I am washing the lid the pressure plug always comes out on its own. Because they send extra pressure plugs I tried a different one but the same thing happens. I had to put my canner out of service until I got a new pressure plug. The new one works fine and does not fall out when the lid is being worked with.
Recommended Products

$11.99

$ 5 .99 $5.99

4.8
Select Option