Your cart is empty.
Your cart is empty. Functions and Requirements
1 General requirements
1) The display adopts 12.3-inch high-definition LCD (1920*720); 2) Process the input analog quantity, including (speed signal, temperature signal, oil pressure, etc.), and can carry out fault detection.
2) Process the input analog quantity, including (speed signal, temperature signal, oil pressure, etc.), and can carry out fault detection.
Measurement
3) control of turn signals, headlights, etc., and fault detection;
4)CAN/IV fiber optic communication.
5) Support cell phone Carplay (optional).
6)Support USB port to upgrade all software versions.
7)Support signal input of front view/right view area(optional).
8)Metric/English switching display.
9)You can set some parameters of the instrument through the square control button.
2.LCD requirements
LCD is a fully laminated TFT12.3-inch color screen.
Pixel:1920*720:Brightness:1000
cd/m2 Contrast ratio: 650
3. Bluetooth Parameters
Bluetooth v5.0+EDR single chip
Transmit power:4dBm(class )
Receiving sensitivity:-90dbm@0.1% BER
Frequency range:2402-2480MHZ
Baseband clock: 26MIHz
Antenna Impedance: 502
4 Environmental Adaptation
1)Working Power Supply
Operating voltage:8-16V Static current: When the voltage (lower than 8V higher than 6V) or (higher than 16V lower than 20V), the display goes out, but the meter is still working.
When the voltage is restored, the display returns to normal; when the voltage is lower than 6V or higher than 20V, the display goes out, but the meter is still working.
When the voltage is lower than 6V or higher than 20V, the meter stops working.
2)Working and Storage Temperature
Working temperature:-20℃-+70℃.
Storage temperature:-30℃-+80℃.
