Your cart is empty.
Your cart is empty.
HOSE CONNECT FITTINGS, PRECISE CONNECTION
Product Attributes
Colors: Gold
Sizes: Threaded Fitting Size: 1/2 inch
Number of Teeth: 14
Pitch: 1.81 mm
Product ID and OD Insertion into Pipe are 3/8 inch
Overall Size: 5.07 x 1.06 x 1.06 inch
Maximum Working Pressure: 125 PSI
Operating Temperature: 40°F to + 120°F (-40 °C to +48 °C)
Weight: 10.97 oz
Material: Brass
Packaging: 2 Air Brake Hose End Fitting and 2 Sleeves
Installation Steps:
1. Before installation, trim the end of the hose so that it is smooth and even, avoiding unevenness
2. Slide the nut and sleeve onto the hose, keeping the beveled edge of the sleeve facing the fitting
3. Push the hose into the fitting to the bottom
4. Tighten the nut until it makes tight contact with the body hex
5. Once installation is complete, the seal of the fitting needs to be checked. This can be done by placing the fitting in water and looking for bubbles around the fitting
Note
1. Due to the difference of light and screen display, the color of the product may be slightly different from the picture
2. Due to the difference of manual measurement, the size of the product may vary slightly by 1-2 mm
3. Please carefully measure the size and specifications of the product you need before purchase
Product Feature & Functions
1. Made of brass material with exquisite craftsmanship, our air hose quick connect has excellent resistance to rust and abrasion, and can withstand extremely high working pressure.
2. Wide range of applications, not only for automotive air brake systems, but also in other areas, such as: maintenance of lawn mowers, maintenance of brake systems in other industrial machinery
Honest Reviews
Reviewed in the United States on March 27, 2025
These are basic brass air fittings. They come with extra compression fittings, as shown in the picture, which is very nice.They are of good quality like you'd expect with brass DOT fittings, though no extras. Just plain metal.No issues with them.
Sam
Reviewed in the United States on March 16, 2025
Lost a star due to a couple of small things but should be included in the design. While it claims to be 350 psi rated, and the truck air systems today are will under that, I would have like to see a BARBED hose insert for that little extra. Also the spring could use an extra inch of length. It IS possible to kink a 3/8th hose diameter with the supplied spring guard.I do not dislike it enough to say that you should stay away from it, just it could be better.
Recommended Products
