Shopping Cart

Your cart is empty.

Your cart is empty.

2 PCS Spiral Point Plug Threading Tap M6 x 1 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542 Metric Screw Milling Threading Tap, Titanium Coated

5.0 Write Review
Free shipping on orders over $29.99

$7.99

$ 3 .99 $3.99

In Stock

1.Size:M2 X 0.4


  • 【SIZE】 Thread size: M6 x 1; thread tolerance: H2; thread length: 19mm/0.75"; Shank Dia：.6mm/0.24"; square shank width: 5mm/0.2"; overall length: 66mm/2.6"
  • 【MATERIAL】Made by high-speed steel(HSS 6542) which provide high hardness and toughness. Titanium coating can improve wear and fusion resistance, reduces friction coefficient, long service life.
  • 【FEATURE】Plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal. Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads.
  • 【APPLICATION】Great for through-hole threads. available for general purpose applications such as drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • 【TIPS】Machine taps are suggested to be used with tap chucks with overload protection.Control speed based on material hardness during using. It is not recommended for hand use and electric drill tapping.


Product Description

Titanium-Plated HSS 6542 Spiral Point Plug Threading Tap

1

3 Flutes Metric Ground Thread Spiral Point Tap

  • HSS 6542 provide high hardness and toughness.
  • Titanium coating can improve wear and fusion resistance, reduces friction coefficient, long service life.
  • Featured with straight flutes, high cutting edge strength, and easy to re-grind.
1

Two type tap with different chip removal and for which holes accordingly

  • Spiral Point Plug Threading Tap
  • Suitable for through holes, the chips are discharged downward. The machined thread surface is of high quality.
  • Spiral Flute Tap
  • Suitalble for blind hole machining, chip removal upward, good chip removal effect, no residual cutting.

Kind Tips

  • The tapping depth should not exceed 1.5 times the diameter of the tap. For example: the diameter of M5x0.8 is about 5mm, the depth cannot exceed 7.5mm.
  • Control the speed according to the hardness of the material, the higher the hardness, the slower the speed.
  • Before tapping, use a twist drill to drill holes. When tapping, the angle should be vertical at 90° and keep stable.
  • Properly add coolant (such as water) when tapping, which can prolong the service life.
1

How to choose the size of twist drill bit

When the hardness of the material is high, the twist drill can choose a size slightly larger than 0.1mm-0.2mm