Your cart is empty.
Your cart is empty.Jonathan Henry
Reviewed in the United Kingdom on March 5, 2025
Good item match and match the description.
Wallo-53
Reviewed in Germany on March 4, 2025
Sehr gutes Produkt!
sherryberry
Reviewed in the United States on January 26, 2025
came fast, works good.
Rich Loss
Reviewed in the United States on January 26, 2025
Our older dining room chairs became wobbly and I realized the original hardware was failing (the threads were breaking on the insert nuts). Carefully removing the old nuts and cleaning the holes out I was able to use these new bits and install everything nice and tightly back together.
toulouse bruno marcel
Reviewed in France on December 18, 2024
ce que je voulais correspond à mon utilisation
Tory
Reviewed in the United States on November 20, 2024
These threaded inserts are doing a good job. Once piloted, insertion is done via a Allen. They thread into the wood easily and stop as they flange contacts the surface of the wood. The flange prevents the insert from sitting recessed to the wood so if you need a truly flush mount you may have to use a larger bit for just the flange diameter. Internal threads are perfect and once the insert is locked in place with some glue, they perform perfectly.
BenR.
Reviewed in the United States on November 18, 2024
Got these to fasten a pedestal to a table top. There are no instructions on what size hole to drill, so I drilled several test holes and found that for these (M8x20mm), I needed a 3/8" hole. Also, you have to taper the top of the hole so that the insert will fit flush. If you don't, the lip of the insert is proud of the surface. These worked well for my application and I would recommend them.
Spenser Roberts
Reviewed in the United States on November 14, 2024
These have sharp threads on the outside, and the threads internally are smooth. Gets a good bite into the material.
The Do It Yourself World
Reviewed in the United States on November 11, 2024
These are quite tapered so I do not trust them in hard wood. I will only use these for soft wood like Pine. I run a sawmill and have my own customer furniture wood shop. I make live edge furniture. These threaded inserts are for attaching table legs to live edge slabs.I think that due to the extreme taper I will not trust these in hard wood though.One thing I am not happy with is that they say to use the "appropriately sized hole" but never mention what size that should be. This leaves me to experimentation for various wood types to get it right.
Cliente
Reviewed in Italy on October 10, 2024
Ottimo prodotto
Freude
Reviewed in Germany on September 14, 2023
Wie richtig in der Beschreibung beschrieben, muss das Loch größer sein, als bei weichen Material.Ansonsten reißt Sechskantantriebskopfmutter auf. Ihr habt dann keine Chance, dein Einsatz komplett zu entfernen. Wenn ihr euch unsicher seid, welches Bohrloch ihr benötigt, dann testet es an einem Reststück vom gleichen Material aus. Braucht ihr ein Gewinde, welches so richtig stramm im Material sitzt, dann müsst ihr massivere Einschraubgewinde kaufen! Sind dann meist aber was teurer.
Recommended Products