Shopping Cart

Your cart is empty.

Your cart is empty.

3 Inch Coarse Twisted Knotted Wire Wheel for Angle Grinder, 5/8 Inch-11 Threaded Arbor, 2 Pack 0.020' Carbon Steel Wire Brush for Grinder, Deep Sanding Heavy Rust, Paint.

Free shipping on orders over $29.99

$7.99

$ 3 .99 $3.99

In Stock

About this item

  • Enduring and Safe - The inner and outer fixing plates are double-pressed by thickened steel, which make the wire on the cup brush firmer and safer. The thickened nut has a regular thread and is firmly connected to the angle grinder. Effectively avoid the occurrence of steel wire flying and breaking during heavy work.
  • 0.02 inch Knot Wrapping Carbon Steel Wire - Made of 0.020in high-strength hardened carbon steel wire, wire wheels for 4 1/2 angle grinder is not easy to break or fly. With pecfect knot integrity, the wire is stronger without springback. Will not lose or bend during intense use.
  • Improve Grinding Efficiency - Twisted angle grinder wire wheel runs at up to 8500 RPM for Angle Grinders with 5/8" 11 NC thread shank. Easily & smoothly polish severe rust, corosion, paint, scale.
  • Great Heat Dissipationt - High-quality carbon steel wire and large elastic structure, so that the working surface will not be blackened by overheating.
  • Wide Appliction - Suitable for grinding rust, paint, splash spatter, slag and oxide scale, while cleaning the edge of the weld to remove burrs.Wire cup brushes are used for surface preparation before painting, spraying and electroplating.
  • WARM TIP - For your safty, before use wire wheel for angle grinder, please make sure wear a pair of safety glasses, safety mask and protective gloves.



Product Description

1
7
2
3
6

WIDE APPLICATION

5

WARM TIP

1.For your safty, before use wire wheel for angle grinder, please make sure wear a pair of safety glasses, safety mask and protective gloves.

2. Check whether the host (air-driven, electric), portable grinder and the wire wheel model used are in line with each other.

3. RPM MXA 8500 RPM for Angle Grinders with 5/8" 11 NC thread shank.

4. When the wire wheel is newly installed, it should be idling for 3 minutes in order to remove the remaining broken wire from the periphery of the product. During use, it should not be hit too hard, and the service life should be maintained to avoid danger.


Engineer D.
Reviewed in the United States on November 9, 2024
Decent quality, I used one piece to strip metal hand rails, with minimal damage to the brush. Remember to safety equipment when using them; the metal pieces can fly out like bullets. Definitely face protection and thick shirt/pants.
Ken Woods
Reviewed in the United States on May 22, 2023
I love this thing, it works so good that I feel I have to extoll all of its good features!It works great, it rips through areas of rust like you wouldn't believe, it's easy to install in your grinder. Wow, that took less time than I thought it would. Oh yeah, it was pretty easy to control at full speed.Seriously though, this wheel zipped right through the rust, taking it to bare metal in no time, and it was so easy to keep it where you wanted it to be, so the work ended up much cleaner than I had expected. It fits a standard sized grinder, and didn't wobble at all.Would I buy this again? Yes. Would I recommend it to others? Yes.
Magdamire
Reviewed in the United States on March 23, 2023
Note wear safety gloves and glasses wheel started to come apart. I used verbal speed angle grinder maybe half speed took the paint off fast. Got as far as what you see in the picture before I felt I wire hit me in leg thankfully I was wearing jeans. Notice few more wires about to brake off just use caution why I gave 3 starts.
Customer Review
Reviewed in the United States on March 14, 2023
I had been using a wire brush to remove tile efflorescence (that deposit over grout that comes from water seepage, usually made of calcium carbonate) from some old tiles. I was interested in this "3 Inch Coarse Twisted Knotted Wire Wheel" to speed up the process. And boy does it work well!This wire wheel wipes away tough calcium deposits like cleaning a chalkboard with an eraser, fast an effortless. Within minutes of installing this wheel I had cleared more calcium deposits than would have taken me a full afternoon to do by hand!After that I decided to try clearing the water stains as well. It was a little more work to make sure to get it all smoothly (like scrubbing with a sponge) but this wheel cleared off water stains too (see photo, yellow arrow indicates area cleaned that used to be covered with the water staining like the rest of the tile).After doing all that there is still not even the slightest visual evidence of any wear to the wire wheel. It didn't even loosen the twists.I'm glad I got this, it's definitely saving me a ton of time already and I'd recommend it to anyone who doesn't have a wire wheel in their toolbox yet for their angle grinder.
Trevor & Amber
Reviewed in the United States on March 14, 2023
Used one of these to clean off some rusty metal that I had laying outside so I could use it for a project and the wire brush attachment worked great. I also used this to strip some paint off from some aluminum that I am also using for my project. I like the fact that the wire is braided which makes a big difference in performance vs the non-braided wire brush attachments.
Canada Road
Reviewed in the United States on March 13, 2023
These things just fly apart. Don't lastmore than 5 minutes.
STEPHEN C MACDONALD
Reviewed in the United States on March 10, 2023
This review is for 3 Inch Coarse Twisted Knotted Wire Wheel for Angle Grinder, 5/8 Inch-11 Threaded Arbor, WENHUALI 2 Pack 0.020" Carbon Steel Wire Brush for Grinder.The wire is thick, 20 mils. The 5/8-10 threaded arbor fits my Craftsman angle grinder perfectly.You’ll need to handle these cups carefully as they are sharp.As needed I’ll be using these to clean up rusted metal.There is currently a significant price drop on Amazon if you order more than just the two-pack of these 3 inch wire wheels.$6 each for two pack$4.20 each for five pack$3.60 each for eight pack
Carl's Garage
Reviewed in the United States on October 21, 2023
Great value, works perfectly if you don’t mind the extra rumble from them being unbalanced
Recommended Products