Your cart is empty.
Your cart is empty.304 Stainless Steel M6/M8/M10 Fully Threaded Rod Studs，Long Threaded Screw Right Hand Threads All Threaded Rod Studs for Anchor Bolts Clamps Hangers U-Bolts
C Nelson
Reviewed in the United States on March 4, 2025
I like this handy kit of M6 threaded rods with flange nuts. I used two of the rods to make a battery hold-down for my Saab project car. The rods are stainless steel to help resist rust in exposed areas. They are 250mm long (about 9.8 inches) so they can be used in many applications. Happy to have the spares on my parts shelf for future use. Good price as well. I would buy these again.
Thomas N.
Reviewed in the United States on March 18, 2025
Great quality threaded rods. Rolling these around on my desk, they're perfectly straight as far as I can see. The rigid packaging probably helps keep them from bending during handling.Very happy with these, and how they've worked on my 3D printer. Bent rods is a common issue, but thankfully not here.
Q
Reviewed in the United States on March 11, 2025
These are decent threaded rods in stainless, which makes them good for use when exposed to the elements. Two sticks at roughly 10" long each. At my local hardware store, I can get all-thread in 36" sticks (longer total length plus more utility than multiple shorter cuts) for lower cost than this, but only in regular zinc plated steel and imperial sizes. If those two limitations were acceptable, it would pretty much always be better for me to pick up rods locally, but they simply don't sell stainless or metric all-thread.
Tony Campati
Reviewed in the United States on February 23, 2025
Really nice threaded rods. The threads are very nice and clean. The nuts are just as well made also. The nuts spin nicely down the rods and everything is nicely finished. It seems like they are stainless and they don't show any signs of rusting like a lot of threaded rods I've gotten from the internet. I'd recommend them.
Customer
Reviewed in the United States on February 17, 2025
I needed an M6 size rod to cut into pieces. Threads are not important to me. And this one is sized just what I needed. But if you are ordering this as a drive mechanism for a RC toy, 3D printer drive etc, stay away and look elsewhere. The thread machining is very rough. Even the included nuts have hard time traveling on the track
J Field
Reviewed in the United States on February 16, 2025
Good quality. These are similar to 1/4-20x10" threaded rods, but with a finer thread (and therefore not interchangeable). I am using them to tie together pieces of plywood forms to pour concrete, which requires washers (not included) and more nuts.
Frank Wood
Reviewed in the United States on February 15, 2025
I have a project with turnbuckles in a marine environment. The design is that the turnbuckle not only is a tension member but it must be rigid and work in compression if necessary. I made a design change and the M10 threaded turnbuckles were not long enough. I got these 304 Stainless Steel M10x250mm Fully Threaded Rod Studs to insert into the turnbuckle and a M10 coupler to extend the turnbuckle. Works great.
aTypicalEngineer808
Reviewed in the United States on February 13, 2025
Summary: Using some pipe clamps to join poles together for a ground mound, solar rack. Ordered these M8 couplers to add some brackets to the ends of the threaded rods (for the clamps).Recommendation: Something to check upon receipt is the condition of the threads, and I run the bolt all the way in to ensure the item is manufactured well. Couplers are made with a round exterior or a hex exterior; I'll generally always get the hex since you can use that for tightening, and the only time you'd want round is if you needed/wanted a lower profile. You'll also need a jam nut, or thread locking sealant (or you could butt the two threaded rods end together when tightening, essentially using the end of the other rod/bolt as the locking element.Observations (MDRILLA): This company offers 18 products, but only 5 threaded rods, so non-specialty manufacturer.Conclusion: At $8 for a 2-pack (10-inch), rating this 3-stars (-cost, -non-specialty).Observations (HARIENDNY): This company offers over 500 products, but this is the only hardware offering, so non-specialty manufacturer.Conclusion: At $9 for 6 ($1.50/each), these are average price, rating these 3-stars (non-specialty).Related Products:304 Stainless Steel M8x250mm Fully Threaded Rod (Pack of 2）~ $8Brand: Mrdillahttps://www.amazon.com/gp/product/B0DR8BMYK26 Packs M8 X 1.25 Pitch 40 mm Length Metric Hex Coupling Nut ~ $9Brand: Hariendnyhttps://www.amazon.com/gp/product/B0DPHYYRWR
Recommended Products
