Your cart is empty.
Your cart is empty. Are you looking for universal spares pinion gear for your RC car?
We can help, we provide 1/8 inch hole 32p pinion gear set comes with set grub screws, they work well and have a secure fit with no modification needs.
Package include:
1 X 32p 1/8inch 12T pinion gear
1 X 32p 1/8inch 13T pinion gear
1 X 32p 1/8inch 14T pinion gear
1 X 32p 1/8inch 15T pinion gear
1 X 32p 1/8inch 16T pinion gear
5 X Grub Screws
1 X Hex Key
💡 Make sure you thread lock the grub screw. They are hard to find when they fall out.
💡 Larger gears will result in higher speeds while smaller gears provide more torque.
For quicker acceleration go for a smaller pinion gear (with fewer teeth) and larger spur gear (with more teeth).
Your car will accelerate off the mark very quickly with more torque, and you'll also benefit from cooler running temperatures, extending the life of your motor and ESC.
💡How to install the pinion gear:
You will probably need to loosen the motor a bit, in order to fit the pinion gear on. Make sure you lock it in place on the flat portion of the motor shaft.
When you are tightening it back up, make sure you leave about a gap between the pinion gear and the spur gear. That gap will be very small. It should be about the thickness of a piece of paper.
At last, if the motor you are using has a 1/8 inch shaft with an 32p spur gear then it should fit... It's not about what vehicle you have necessarily...
Let us make your RC happier! LOL
Éric Grenon
Reviewed in Canada on January 16, 2025
Thank You Very Much
linda phillips
Reviewed in the United States on January 14, 2025
Very easy to install.
mike burch
Reviewed in the United States on September 29, 2024
Great selection of sizes and priced cheap
Troy Hester
Reviewed in the United States on August 20, 2024
I'm not sure honestly on how well they hold up because I bought it for my fireteam but I didn't double check on the size of the bored hole size is smaller, but it looks like it is well made and will do the job for a RC that has a 3mm motor shaft.
Phil
Reviewed in the United States on November 17, 2024
Good so far
MB3
Reviewed in the United States on January 25, 2024
I just built a Grasshopper ~38 years between my 1st and this one. Instantly upgraded to a 540 sport tuned and had to order an 18T pinion. Not realizing 2 different shaft sizes (that's what she said) I ordered the 5mm and it didn't fit. This came today and fit perfectly. It gives you a few gears to choose from and extra grub screws to spare. Great purchase.
Travis
Reviewed in the United States on April 3, 2024
I haven't gotten to use them yet, but honestly they feel higher quality than my Factory pinion.
M.R
Reviewed in Canada on August 10, 2023
Bon produit!
Isaac shaw
Reviewed in the United Kingdom on July 23, 2023
They are strong and good for the price I needed these because I didn't know what gearing to use to keep the car fast but not overheat
Scott Knapp
Reviewed in the United States on July 29, 2022
Bought these to slap together in my scx10.2 build. I like the extra grub screws and packaging.The teeth seem to be a little off in machining and not the Best quality but it works.Also a bit in the large side if you’re trying to squeeze into a tight space.
Kyle R.
Reviewed in the United Kingdom on June 2, 2022
Good quality gears fit in my trx4 fine
Nick
Reviewed in Australia on November 2, 2022
Overall good quality on the metalwork however compared to some other pinion gears I have used in my Slash 4x4 they are taller and don’t allow me to have it far enough on the motor’s output shaft but it is also too large for me to use it the other way around on the shaft. Making the area that the grub screw is screwed into smaller would be ideal. Also I think it’s worth mentioning that I received a few extra grub screws.
Edward Highe
Reviewed in the United States on April 10, 2021
These are probably the quietest 32P gears I've heard in a long time on an rc vehicle. Installed the 19T (not pictured) on Tamiya Rookie Rabbit (DT-01 chassis) with OEM Johnson 550 motor. Came in an anti-static bag in a small box. Included the Allen wrench and 9 extra set screws. Heavy, hardened steel. Lazer etched with pitch and tooth count. Considerably wider gear hob and overall length but, working perfectly. Just double check your clearances to ensure proper mesh and fitment (you may even have to install the pinion backwards depending on your vehicle). Added some size comparison pics using the 17T for example.
Recommended Products
$29.99
$ 15 .99 $15.99