Your cart is empty.
Your cart is empty.
3M 5952 Heavy Duty Mounting VHB Tape is black, double-coated VHB adhesive tape with an acrylic foam core. A modified acrylic adhesive is on both sides of very conformable foam which provides adhesion to the broadest range of substrates/surfaces, including most powder coated paints. Comes on a red film release liner.
3M VHB Tape provides the convenience and simplicity of a tape fastener and are ideal for use in many interior and exterior bonding applications. In many situations, they can replace rivets, spot welds, liquid adhesives, and other permanent fasteners. Recommended to use 4 square inches of 5952 VHB tape for every 1 pound of load; although rough surfaces may require additional tape. These VHB tapes are made with an acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability and excellent solvent and moisture resistance. Country of Origin: United States.
Zeena
Reviewed in Australia on August 27, 2024
This appears to be the real deal 3M tape. Sticking well on a range of surfaces indoors and outdoors. Arrived quickly. It seems a bit costly for tape but worth it for what it does and a decent amount of tape.
Devon
Reviewed in the United States on July 24, 2024
I bought this product because 3M two-sided tape seems to hold up well against the elements. I have used this before with good results.
Friagram
Reviewed in the United States on December 7, 2024
This tape works good for automotive. Holds dash cams up through the summer (110+ degrees)
Ray Sexauer
Reviewed in the United States on December 29, 2024
This stuff has innumerable uses. For anything that you need to ensure it doesn't come loose you fond the right product. Although it can be tricky to cut a little practise makes perfect.
Jeffrey Barnhill
Reviewed in the United States on December 11, 2024
It has been over five years now since I have used this product. I had trim peeling off of a 2002 vehicle and I used this product to reattach it. I cleaned the surfaces well. The adhesive is very sticky, so make sure you get it on straight to start with. I do not think you would be able to peel and reapply with out damaging the product. I temporarily added a wood strip to the area to guide the application. Vehicle is parked out in the sun/weather year round. Still solid.
Sid
Reviewed in the United States on November 8, 2024
Ricers come get this. This holds up any aftermarket RICE parts you slap on your car. Would recommend. I also use it for some home DIY stuff like mosquito nets.
Claes J.
Reviewed in Sweden on November 28, 2024
Bra allt i allo tejp om det ska hålla.
Chris Sztof
Reviewed in the United States on November 11, 2024
I used this to tape down solar night lights to my concrete stairs outside, a notoriously difficult surface to work with when it comes to conventional adhesives.After about a year, I had to take them off recently because we were getting some work done. I couldn't even get them to move! I had to use 2 screwdrivers to slowly pry them off via some leverage. I was skeptical but this tape did the job through a year of NY heat, cold, rain, etc on a porous surface and likely would have lasted years without degrading.
Brandon Moon
Reviewed in the United States on October 17, 2024
5yrs later and this stuff is still holding stuff on my vehicle! Best double sided tape I've used.
Customer
Reviewed in India on March 9, 2023
Excellent
Jesse Felt
Reviewed in the United States on November 24, 2023
I picked this up because the tape included with the phone mount in my car failed when it started warming up earlier this year. I'm fairly sure it was the same tape, but because of the shape of the phone mount base I didn't get a solid adhesion when I originally mounted it.This is the reason I went with 4 stars for ease of use, since you have to ensure that the tape gets good pressure across the entire mounting surface to ensure it properly adheres, which can be difficult in some situations. In my case, I had to remove the trim panel in my car and use clamps due to the texture of the panel and slight curve on the mount. However after taking that extra step, it is definitely holding as strong as this tape is supposed to.It has been mounted for a couple of weeks now, and the temperatures are starting to dip down below freezing. This tape is supposed to hold solid down to -40 degrees, something we rarely see around these parts, but if I have any issues I will update this. Likewise, when next summer comes around and we start seeing temps into the 100s/40s I will update if it starts to release then as well.
Hans van Veen
Reviewed in the Netherlands on September 22, 2021
Heel geschikt voor het betere dubbelzijdige plakwerk
Customer
Reviewed in Australia on February 7, 2020
Great product ,did the job just right
Recommended Products
