Your cart is empty.
Your cart is empty. Specification:
Name: geared motor
Rated voltage: AC110 V
Rated speed: 0-450 RPM/min
Reduction ratio: 1:3
Power Phase: single-phase
Torque: 0.32nm
Motor size: 58*70*92mm
Reducer size: 58*70*32mm
Shaft diameter: 10mm
Features:
Flexible installation
Efficient works
Torque large
Smooth operation
Long working life
Note: Under different deceleration ratio, the output shaft speed is different. The output shaft speed is equal to the motor speed of 1500 rpm divided by the deceleration ratio.
Packages:
1 * Gear Motor
1 * Speed Governor
1 * reducer
In order to reduce the inapplicability of the motor, please judge according to the selection process before placing the order
1.Judge the deceleration range first
1) The speed is within the safe speed range (e.g. 315-450r), choose the wattage according to your actual load
2)The speed is outside the safe range (such as 100-450r), choose 2-3 times of your actual load（For example, if you want to choose 100-450R 15W motor, now you need to choose 30-45w motor）
2.Judge load
1) Load product ＜1m，If the torque is 10nm, the load is generally ≤ 10kg
2) Load product ＞ 1m, please consult us
3.Continuous working time of motor
1) Continuous working time of motor＞4h, Wattage selection needs to be increased (For example: if you want the motor to Continuous work 5h, you need to choose lager watts than your actual load watts)
2)Continuous working time of motor＜4h, Wattage selection no needs to be increased
4.Judge the installation form (2 kinds in general)
1) Directly use the output shaft to drive the load [that is, the load is directly forced on the shaft, which is generally judged by comparing the data in the table, and the difference is not big]
2)second, Motor as a power source to drive a whole equipment [there are many accessories, such as roller, pole, etc.], which we usually need to match 1-2 times larger. (For example, if you choose the second installation way, you want 15W motor first, now you need to choose 30-45W product.)
Tanner Anderson
Reviewed in the United States on January 30, 2025
Weak motor. It will do very small applications no problem. Not very much torque
J Grimwauld
Reviewed in the United States on April 4, 2025
No torque.Have a 5kg load, need to spin at 30RPM~.This motor won't spin.
GEBrown
Reviewed in the United States on May 27, 2024
This is a strong, smooth motor for vairous uses. Installation is not difficult and runs forever - I have another that I have used for years.Recommended
Kaycie
Reviewed in the United States on October 31, 2021
Didn’t work straight out of the box. Rather than send it back, I took it apart to find that it looks as though it’s a refurbished motor that wasn’t properly rebuilt. The gears inside didn’t line up correctly so I fixed it and it seems to work now.
Recommended Products
