Your cart is empty.
Your cart is empty.RELAY; POWER; MINIATURE; 30A; SPST; 120VAC; 1 FORM A; SEALED
Dan
Reviewed in the United States on November 1, 2024
Defective parts
Kendall Jolly
Reviewed in the United States on June 23, 2023
fit my 6 gallon atwood
Penny M. Forney
Reviewed in the United States on October 30, 2023
Dad used it. It must work.
Pam Maroney
Reviewed in the United States on August 1, 2020
Replaced the relay in our Kenmore Vac. Works perfect, love the VAC so wanted to fix it, which w3e did for $10!
Ryan D. Crompton
Reviewed in the United States on June 28, 2020
Let's talk about this humble little relay.I wanted a way to use Alexa to control my fireplace. You'd think somebody out there would make a true relay switch with a secondary mechanical connector, but they do not. So if you want to smart-ify your gas fireplace, you need a smart switch and a relay.This relay takes a 120V signal to close a (theoretically 12V) normally-open terminal.There are two sizes of terminals in use - 0.187" and .25". Make sure you purchase appropriately.This relay is not quiet; it makes a notable thunk.Having said all that, it does what it says it'll do.
VW
Reviewed in the United States on May 16, 2020
Worked perfect to get my smart switch to turn on my gas fireplace. Fireplace does not need 120V so I used this to act as the switching device and it does the trick. Small enough to fit inside the wall box behind the switch. You will need spade connectors to attach to the terminals.
Brian Negele
Reviewed in the United States on June 27, 2019
Used for a heat pump and so far so good after one days use
Dan R. Drilon
Reviewed in the United States on January 20, 2019
Works as advertised. 120v coil can be connected to 110vac house wiring and simply shorts the remaining to pins. The way a relay should work. Using this to control a 12v circuit with a 120v wifi switch.
Recommended Products
