Your cart is empty.
Your cart is empty.Amazo n Custome r
Reviewed in Canada on June 8, 2024
Great product! The original motors have the plug on them, this one has an extended wire which REALLY helps when doing any more door work down the line. They come stock riveted on the door so I carefully cut the rivets with a grinder and bolted this new motor on with locktite, works better than ever, I definitely recommend!
A.B. Fulcher
Reviewed in the United States on February 6, 2024
It's a pain in the butt to install but fits perfect and works wonderful.
Carolyn
Reviewed in the United States on November 7, 2024
Great replacement for the cost.
amazon shopper
Reviewed in Canada on September 13, 2023
perfect fit for my truck easy to put in :)
Ethan
Reviewed in the United States on July 6, 2023
Works good so far. Just wish it came with mounting bolts. The old one was held in with rivets so just know that before you install you will have to drill them out.
Customer
Reviewed in Canada on June 29, 2023
Installed easy and works nice and smooth, faster than the original unit ever was. Only issue I had was that the OEM unit was riveted in with large stainless and aluminum rivets, and replacement ones the same size are not readily available where I am located. Including new appropriate sized hardware to bolt it in or new rivets would have been great, but being a mechanic with a bin full of hardware I was able to locate the perfect set of low profile Allen head bolts and nylock nuts to assemble it ok
James Womack
Reviewed in the United States on December 3, 2023
This new regulator works great , dont have to go to window at bank on foot cause window wont roll down. window moves much faster than before motor quit
Customer
Reviewed in the United States on December 12, 2023
This went on easily and I had zero problems with it. Fit as stock and functions well. 1997 Silverado
Custom64sled
Reviewed in the United States on November 29, 2023
No instructions included but easy to install. No hardware included (factory mechanism is riveted to door and must be drilled out in order to remove factory power window crank assembly). Much faster than old gm window motor. Time will tell if this is a quality reolacement. Install and removal takes approximately 4 hours to complete.
Josh Brewer
Reviewed in the United States on May 19, 2021
I installed this window regulator in my 1996 GMC Yukon, and this was a regulator for the driver's side window.1. The window regulator is poorly made.2. Did not come with the Rivets to install the part.3. Only lasted long enough to get past the return window on Amazon, so this was a loss for me.I initially liked the part as the window would go up and down a little faster than the initial OEM regulator but soon found it to start making noise as the window would go up and down to ultimately have the unit fail and drop the window while going down the freeway, of course, this would happen on a rainy day, so I was able to get soaked on my way home from where I was coming from.I ended up going to Napa and getting a different regulator, I spent more money, but the napa part seemed to be made better and came with the hardware to install the regulator. Please don't waste your money as I did on this part; get something different and better quality. Or you might be sorry like I was and end up soaking wet until you can get the part to replace the regulator.*** Please see the pictures showing the dropped window after I drilled out the screws to take the inner door panel off. What happened; is that the rubber detached from the roller mechanism, and the roller came out of the channel to allow the window to go up and down. That is why the window dropped. The conclusion is that poor material where used in the manufacturing of the part.**** The part in question is in the lower-left corner of the picture; you can see the rubber on the roller has separated and is not smooth.
csi2drmr
Reviewed in the United States on March 13, 2020
Fast shipping, well packaged (a box protecting the boxed regulator), no instructions with Item, examined new part to old part and found no differences. Always check to make sure the rollers are matching the part you removed, as I've received a regulator from another vendor that had the" roller" pop riveted on the wrong side, which would not fit the guide channel. Save yourself time and frustration by immediately inspecting and comparing both items. Also recommend testing your window switches to make sure its working properly. Check YouTube for ways to test regulator motor and window switch. Found a good trick to get your window up, providing the switch is the issue, not the motor. How did we ever survive without YouTube? How to install regulator part can be found too.
Recommended Products