Your cart is empty.
Your cart is empty.Product Description
AWF PRO Extended-Set Epoxy
Engineered for Strength & Versatility
Transform your projects with AWF PRO Extended-Set Epoxy. With a 12,300 psi compression strength & a 35-minute gel time, it offers precision & versatility for anchoring in concrete. Resistant to chemicals and minimal shrinkage ensure lasting durability & reliable bonds every time.
Extended-Set Epoxy
Extended vs. Rapid Epoxy
| | Two-Component Epoxy | |
20.2oz | Size | 20.2oz |
12,300 psi | Compression Strength | 12,600 psi |
35 Minutes | Gel Time | 9 Minutes |
| | Minimal Shrinkage | |
Extended-Set Time | Special Features | Rapid-Cure |
Applicator Included |
| | Two-Component Epoxy | |
20.2oz | Size | 20.2oz |
12,300 psi | Compression Strength | 12,300 psi |
35 Minutes | Gel Time | 35 Minutes |
| | Minimal Shrinkage | |
Extended-Set Time | Special Features | Extended-Set Time |
Applicator Included | |
| | Two-Component Epoxy | |
20.2oz | Size | 20.2oz |
12,300 psi | Compression Strength | 12,600 psi |
35 Minutes | Gel Time | 9 Minutes |
| | Minimal Shrinkage | |
Extended-Set Time | Special Features | Rapid-Cure |
Applicator Included | |
- Rapid-Cure Epoxy
- Extended-Set Epoxy Kit
- Rapid- Cure Epoxy Kit
Grammar Guru
Reviewed in the United States on November 29, 2024
Solid and well made container and nozzles. There isn't much around the house that requires such slow setting and high strength epoxy--plenty of confidence for a DIYer such as myself. And with a 20oz capacity, I'll be getting extra nozzles since I will not use large amounts at one time. Be aware that you do need a dual tube calking/epoxy gun. They can be spendy if you aren't a tradesman and don't already own one. It is possible, if you have a clever way to do it and save what's not used, to cut the tube and mix small amounts at a time. That can be cost effective when you consider that JB Weld from Lowes costs about $8 for less than an ounce.
Mr68K
Reviewed in the United States on November 2, 2024
This is a great value considering how much epoxy you are getting. The tubes are 100% full, most products are 1/2 full.The product sets in about 6 hours, so the Extended Set description is correct. I would estimate that on a really hot 95+ degree day you would have at least 3 hours to get things positioned.This product sets very hard and brittle. See the last picture, the cardboard was bent after waiting 24 hours for a full set. This is testing for ductility, there is virtually none so beware. If there will be any vibration or huge change in temperature I would select another epoxy - one that is toughened with rubber particles.Note: If you don't have the proper applicator gun, you can use two regular old caulking guns at the same time to get it done.
Mr help you
Reviewed in the United States on November 1, 2024
This was too much epoxy for my task at hand but it worked. I used this to help give some extra hold to 2 anchor bolts that I installed to keep a U bracket connected to the concrete. A little on the steep side as far as priced but good.
Sally &Tony
Reviewed in the United States on October 4, 2024
I recently attached a small pole to the concrete in my backyard for a solar-powered light. I wanted to make sure the pole was anchored properly, so I decided to use this epoxy to help. It was easy to use, as the directions indicated, and everything went as planned. Time will tell if I secured this light securely, but I feel pretty good about the added benefit of this product to help it all bond together. If I notice any problems in the future I will update this review but so far I recommend it and gave it 5 stars.
Aliviana York 2.0
Reviewed in the United States on October 25, 2024
It is gray epoxy. Not my first time using a product like this.It took waaay longer than 35 minutes to gel, and it was overnight before it was completely set.This was most likely due to the cold temperatures I am working in, 35⁰ to 60⁰.Usually warmer temperatures will speed up cure time.It's probably not a good choice for any Vertical application because it will run, drip, and flow.It will not stay in place like caulking, it wants to flow and level out.This is basically just like J B Weld original formula.It WILL NOT fit in.a 400ml epoxy applicator gun !! You need a 600ml/650ml applicator gun.I think it's a quality product and would use it again. Approved.Hope My Review Was A Little Bit Helpful To You !!
Yambobo
Reviewed in the United States on October 18, 2024
I use two-part epoxy a few times per year and this product compares favorably with others I’ve used. You get about a half-hour of working time before it noticeably hardens, so plenty of time to get whatever you are working on in place.This is pricey, but again... this is good stuff and should hold strongly and durably. I had a little left over from anchoring some bolts, so I used the rest to seal up a driveway crack and that turned out well too.
Timothy Blum
Reviewed in the United States on October 16, 2024
This epoxy works great. The extended set time is good for certain applications where of course you want some more time to get everything lined up. Note the bottle doesn't say anywhere what the set time is so I had to reference the time in the listing at 35min. I actually wrote in Sharpie on the bottle so we would know when we used it. Comes with 2 tips so you get 2 uses before you will need more tips.
rpesq
Reviewed in the United States on October 13, 2024
No complaints with this stuff. This is the extended-set, and it works well for my needs. You can fasten into concrete and have confidence that it wont come loose. Somewhat pricey but worth it to be sure your projects are sturdy and strong. Recommended and I would reorder again. Be advised that you need a dual sausage gun to feed this stuff. Working time for me was approximately 40 minutes before I could no longer move the anchors.
Recommended Products
$12.75
$ 5 .99 $5.99
$25.99
$ 12 .99 $12.99
$25.92
$ 10 .99 $10.99