Your cart is empty.
Your cart is empty.
Can be installed in 30-45 minutes with simple hand tools; NO Drilling, NO Cutting, NO Fabrication Required!
The Cold Air Intake System comes complete with everything necessary for installation, including comprehensive step by step instructions.
AF-Dynamic Cold Air Intake Kit complete with high-flow air filter and aluminum heatshield with insulation mat. The intake kit not only increases power, but will also provide better engine response compared to your restrictive stock air intake box. The included reflective insulation mat material, when added to the heatshield, further reduces intake temperatures and heat soak from the engine bay.
Features:
· Replaces OEM filter and air box with 100% New Quality Parts!
· Uses only top-quality stainless steel button head bolts, washers, locknuts and band clamps.
· Uses only high quality silicone coupler, elbow and hoses “NOT CHEAP RUBBER”
· Works with Original Equipment Manufacturer computer systems.
· Helps engine to more efficiently draw in colder air, resulting in better throttle response and
consistently higher horsepower output.
· Improves up to 95% filtration efficiency over OEM paper filters.
· Increases of 5 to 10 horsepower, 6 to 8 percent of Torque, and improved gas mileage of your vehicle.
· Intense deep sporty sound.
· PROFESSIONAL INSTALLATION IS HIGHLY RECCOMENDED.
· High Flow Air Filter ( Washable and Reusable)
· Black Powder Coated Aluminum Pipe and Heatshield.
· Reflective Aluminum Heat Shield Mat Material
· 4 Ply Silicone Coupler
· 4 Ply Silicone Elbow
· Silicone Vacuum Hoses
· All Necessary Hardware and installation instruction
Patrick Neill
Reviewed in the United States on November 10, 2024
Nice looking intake, definitely see a bit of improvement on power and mpg. Good for the price.Reason for the 4 star rating: The instructions are a bit rough and the pictures are small and in black and white so hard to see. Also on the box assembly there is a extra peice. The instructions don't say anything about that peice. Depending on where your AC lines are located you may have to change out the front side of box to the smaller peice to fit under the AC line(attached photo of it).
Nednarly
Reviewed in the United States on December 9, 2023
This CAI kit was very easy to put together, took me about 1.5 hours, I took my time it’s cold in Wi.. It is a very solid CAI, install was a breeze. Very nice sound, better throttle response not sure about hp gain and so far 2mpg more. And it looks awesome under the hood. That is just with this intake install.I now have an unlocked CPU with a tune in it, hp is up for sure now I am thinking 20+, it has way better throttle response. MPG is up 4.5 with regular driving. The way it looks under the hood in place of the original intake and the sound of the new intake make it well worth it for the price.
TX-Patriot
Reviewed in the United States on August 25, 2022
My career is in industrial engines...think minivan size. I know the better an engine breathes, the better it will perform, and a proper intake filter is critical in that effort. I've not really questioned the factory air filter and it's capacity, compared to the engine's needs. When exploring mods for my Ram Hemi 5.7, cold air intake kits were highly touted as a quick way to increase power and horsepower. I was replacing my engine, after 245K miles and decided to add a couple of simple mods. The cold air intake was surprising! I can't measure mpg because I'm running a new engine that's still quite tight. But I'll vouch for the power increase, and...the growl of the engine when I'm accelerating moderate to heavy...that was shocking! I'm a believer in this CAI kit! It was simple to assemble and install, and I'm anticipating years of trouble-free service.
James Crupe
Reviewed in the United States on July 18, 2022
A decent upgrade for your truck especially for the price. Cant say much for gas mileage at the moment, it won’t turn your hemi into a Prius but I definitely don’t think it hurts. Sound is the best so far, but you have to hammer down to notice it. Installation was a bit of a pain but there are a bunch of videos on YouTube to guide you through. Took me about an hour to install. If I traded my truck in I would buy another for the new one.
Customer
Reviewed in the United States on May 16, 2022
Just starting off by saying it's not bad especially for the price. That said , after installing it I drove my ram and it ran fine. Idled fine. But next start up the check engine light would instantly turn on. Tried doing a hard reset and going over my install to see whays going wrong. ( cant remember the exact code) just knew it was an electrical issues. Found the extension they provide for your sensor had no continuity. Opened up the wiring covers. The welding wasn't done right. There was no contact to the pin thus not having continuity and triggering the MIL. Wasy fix but kinda bummer to have to rig your barely bought product. Also the instructions could have been a bit better. It's not the greatest but could've been a but better. I recommend watching a YouTube video. I also feel like I've lost gas mileage 😬 so I'm giving it a hard 3.5/5.If I could do it over I'd just keep my stock air box lol. Really it's just there for looks. I already have it straight piped so the engine sound didn't change for me 🤷♂️.Do what you will with that information lol
Daniel M
Reviewed in the United States on January 26, 2021
As almost all other reviews here state, the instructions aren't very clear however I found a fantastic Youtube step-by-step video that made the whole process super easy. Search for the channel "Our Garage Auto Detail".The sound and performance are definite improvements that I noticed straight away after installing this cold air intake, and I'm yet to see the MPG improvements, however I am testing it and will report back on this review.One note, the silicone hose that goes from breather valve does not fit. I went to Autozone and got a few different sizes of replacement silicone hose and found one that fits perfectly (funnily enough the Autozone inside diameter was supposedly 5/8" which is what the included silicone hose is, so not sure how that works), but my suggestion would be to get a foot of replacement hose. I spent a long time trying to fit in the included silicone hose, even cutting a small nick to open up the end but the replacement hose was much, much easier.Everything else fits as supplied and overall, once everything was put together, the install only took about 30 minutes.
Dante
Reviewed in the United States on March 29, 2020
Works excellent and you can hear the engine draw air. Nice growl during moderate acceleration.Tip- buy throttlebody cleaner if you have more than 30k miles while you're at it and clean it since it will be apart anywayTaking the sensor off turn it the opposite direction of arrow or you will break it.Pros- same quality as k&n-well built box-cheap-instant performance-quality pipingCons-vent hose goes on borderline kinked that needs to be addressed-wire extension seems cheesy-not their fault but I had to remove the fender well out to get old bracket off.-can get frustrating to install
Kenneth jackson
Reviewed in the United States on April 7, 2019
I love it,sounds better and adds some power. Put the idle air sensor in the rubber grommet before you clamp it all down. Would be nice if this rubber piece was bigger on one side so it wouldn’t fall in the tube. All in all this product is worth every penny and then some compared with similar products. I personally didn’t have any trouble at all with the instructions , you will have to cut the factory hose about 11” , (utility knife works fine) but I think this is a pretty cheap and easy part to get if one ever wanted to put it all back factory. Like others I do recommend loctite on any screws without lockwashers
Recommended Products
$86.00
$ 40 .99 $40.99