Your cart is empty.
Your cart is empty.Product Description
Carburetor For Kohler CV12.5 CV13S CV13T CV14 CV14S CV15S Engine
Fits for Kohler Engine Models:
CH11 / CH13 / CH14 / CH15 -- CV12.5 / CV13 / CV14 / CV15 / CV16 --11hp 13hp 14hp 15hp Mower Motors
Carburetor Replaces Kohler Parts #:
12 853 01 / 12 853 57 / 12 853 57-S / 12 853 82 /
12 853 82-S / 12 852 80-S / 12 853 139-S
- For Kohler Engine Models:
- CH11S-16126 Engine.
- CH13S-22502 22508 22511 22517 22522 22526 22528 22533 22540 22541 22537 Engine.
- CH14S-1828 1830 1831 1832 1835 1838 Engine.
- CH15S-44510 Engine.
- For Kohler Engine Models:
- CV12.5-1201 -1205 1210-1214 1217 -1220 1223 1224 1225 1227 1229 1230 1237 1240 1241 1243 1246 1247 Engine.
- CV13S-21516 21525 21532 21535 Engine.
- CV13T-21513 21515 21517 21520 21522 21527 21538 Engine.
- CV14S-14100, CV14ST-1493 Engine.
- For Kohler Engine Models:
- CV14-1401-1405 1408 1410-1420 1422-1425 1427-1429 1431 - 1434 1437 1441 1444 1447-1449 1461 1462 1464 -1466 1469 1472 1473 1474 1476 1478 1479 1482 1483 Engine.
- CV15T-41501 41529 41534 41547 41552 41569 41575 41579 41583 Engine.
- CV16S-43516 43524 Engine
Fits The Following Model & Spec Numbered Kohler Engines:
- CV12.5-1201-1205 1210 -1214 1217-1220 1223 -1225 1227 1229 1230 1237 1240 1241 1243 1246 1247, CV12.5T 1283, CV13S-21535, CV13T-21517, CV13T-21518, CV13T-21527 Fuel System - Pg. 34
- CV14-1401-1405 1409 1410 -1420 1422-1425 1427-429 1431 -1434 1437 1441 1444 1447 1449 1466 1472, CV14S-14100 Fuel System - Pg. 34
- CV15S-41527 41541 41544 41550 41551 41586 41602, CV16S-43516 43524, CV16S-43524, CV15S-41528 41562 41594, CV13S-21525 21532 Fuel System - Pg. 34
- CV15S-41528 41562 41594, CV13S-21525 21532 Fuel System - Pg. 37
- CV15S-41528 41562 41594, CV13S-21525 21532 Fuel System - Pg. 39
- CV15S-41528 41562 41594,CV13S-21525 21532 Fuel System - Pg. 42
- CV15S-41528 Fuel System - Pg. 43
- CV15S-41528 Fuel System - Pg. 44
- CV15S-41528 41562, CV13S-21525 Fuel System - Pg. 45
Megan
Reviewed in the United States on March 5, 2025
Perfect
Cindy
Reviewed in the United States on March 2, 2025
Identical to the original carburetor for a Snapper 15 hp rear engine. The base gasket was cracked and there was no bushing in the throttle linkage hole but I had parts on hand to fix.
BK
Reviewed in the United States on February 27, 2025
The item was as described. It fit the engine and the engine ran fine with this carburetor.
Leo
Reviewed in the United States on February 19, 2025
Fit well for my older Craftsman Kohler Command with the CV15S engine. Had to swap one thing over from old carb but I believe that’s mower specific. Works well! Cleaned up my poor idle/misfire. Can’t go wrong with the price! Gaskets seemed well with no leaks. Mower starts up quick and easy.
Steve M.
Reviewed in the United States on January 30, 2025
kudos, no kidding!!! carb works great. Idles perfect, no lag on acceleration. Was for a tired old JD that hasn't ran well for a few years... perfection. Thanks for restoring my faith in aftermarket carbs.
Rod Barnsley
Reviewed in Canada on September 9, 2024
Product arrived very quickly, but it was the wrong part in the box.. It did not fit the application as described
Dave C.
Reviewed in Canada on September 19, 2024
A little rough on the idle works great at high speed
Brad Waldhuetter
Reviewed in the United States on August 7, 2024
This carburetor was dimensionally correct but the throttle lever was bent which could have happened during shipping but it was hitting the engine block and causing the throttle to not open. When I fixed it that I could hardly keep the tractor running. I took the carburetor apart and found the seat for the main needle was only inserted about a quarter of the way in. I took the carburetor apart and took the parts I needed and put them in the old carburetor and it works fine. I guess that's what you get for a $15 carburetor
Tim Brown
Reviewed in Canada on October 20, 2024
Fits and works like it should
Devon
Reviewed in Canada on October 26, 2022
I bought this Carb and installed it thinking it would fix my problem with the Carb leaking fuel into the engine even when the engine was off.... it did fix that issue but introduced a new issue that i didnt have before which was the engine bogging at full throttle because it was running too rich and even with the one adjustment on the Carb (which by the way does nothing) i was unable to fix the issue. Not a good quality part.
Anna L Grosz
Reviewed in the United States on April 12, 2022
This carb is a much cheaper alternative than a true Kohler part. However, there are no instructions on adjustment so you have to play with the adjustment screw. Also, I noticed some reviewers had to grind part of the throttle mechanism where the rod goes through and I had to do the same to get clearance so the governor rod would operate correctly on my JD LT155 with Kohler CV15S engine. After doing that, the carb works just like the original.
Rebekah L.
Reviewed in the United States on August 31, 2020
Other than being broken on arrival, seems to be ok.Plastic piece on top is missing a tab-like portion where the linkage would connect.No chance it was broken in transit, as the missing piece is not in the box and the box was very securely taped up. (One of the best tape-jobs I've seen actually)Awaiting replacement from the seller.UPDATE....increased rating from 1 star up to 3 starsReplacement eventually arrived and appeared to be in good shape with no obvious flaws.However by that point I had already stripped the first one to rebuild the one from the mower.Intended to spend $20 and save the time and hassle of rebuilding, but instead spent the time of rebuilding AND extra time trying to get the issue resolved.Seems like a good product and a good company, maybe I was an anomaly.I would say that the product is NOT a direct replacement for my Craftsman Kohler Command 15.5hp CV15S/model 917.256552.The original carburetor has two adjustment screws as well as a threaded hole to screw in the ground wire for the fuel shut off solenoid.This carburetor only has one adjustment screw and nowhere to attach the ground wire.Also, the seat for the needle valve can not be (easily) removed, so don't plan on using this to do a full rebuild. My "rebuild" made the engine run better than it had so I'm satisfied enough for now.The throttle and governor linkages are slightly different too, so save all the parts from the old assembly.Came with two gaskets.
Michel Clairoux
Reviewed in Canada on September 27, 2019
Pour moteur Kolher 12.5 HP Tracteur CubCadet 1330 de plus de 30 ans. Fonctionne du premier coup
Recommended Products