Your cart is empty.
Your cart is empty.Product Description
26" Bicycle Forks Family
26" Bicycle Suspension fork 1-1/8" Threadless triple tree w/double shoulder
- 28.6mm Threadless Fork, Head Tube: ID: 25.4mm, OD:28.6mm
- Disc brake bracket; compatible with 26"*2.325 inch tire max
- 11/8" headset included and works well with the fork
- Outside Diameter of Up Tube:2.89cm/1.138inch and 38.1mm/1.5 inch for down leg,
1-1/8" Threadless Bicycle Suspension Fork
- 26"CDHpower triple tree suspension front fork is compatible with all kinds of CDHpower gas tank frames.
- Disc brake bracket and U caliper bracket;compatible with 26"*2.325 inch tire max
- 11/8" headset included and works well with the fork
- Outside Diameter of Up Tube:2.89cm/1.138inch and 38.1mm/1.5 inch for down leg,
1 1/8" Headset Threadless
- 1 1/8" Bicycle Headset for bikes
- For 44mm Head Tube and 28.6mm Fork;
- Material:alloy and steel,set of 13pcs
- Bearing:Caged(5/32"X22X2pcs)
- Height:22.3mm;Diameter:1 1/8"X44mmX30mm;Finish:CP/ED Black;Weight:140g;
1 1/8" Threadless
Head Tube: ID: 25.4mm, OD:28.6mm
Disc Bracket
Center Hole to Center Hold: 50mm
Dwayne pearase
Reviewed in Canada on March 17, 2024
I really like them and they look really nice on my bike and I would recommend anybody else to try them out and I think you'll like them that's my opinion
ThreeVTBoys
Reviewed in the United States on April 16, 2024
These forks look fantastic, however, there are a few issues.1. Fork is very soft. If you ride only on smoother roads, this should not be an issue. But if yo ride on rough surfaces or off road, they will bottom out easily and cause a CLUNK when they do so. NOT A PROBLEM if you ride on pavement or other smooth surfaces.2. Fork has a slight play direct from factory. It's not bad, but it a noteworthy, but just a very tiny amount.3. Fork has little rebound. Not very springy.4. You need your own top stem bearing, mine came with two bottoms.5. You need to install a crown race.These forks so far have taken a hard hit, but they seem to be all right. Running on a 1500w 48v ebike.They are VERY smooth, good suspension, maybe just a little too soft. Disc brakes go on easily. And NO, a 27.5" Tire will NOT fit in case you want to risk it.
Craig M.
Reviewed in the United States on August 16, 2022
The media could not be loaded.
Chris
Reviewed in Canada on June 14, 2022
Patricia
Reviewed in the United States on July 9, 2021
Good product good looking
Kevin S.
Reviewed in the United States on January 13, 2021
I’m a 6’ tall bodybuilder, and I weigh about 280 pounds. I’m only around 10-15% body fat so losing weight really isn’t an option for me, and other reviews were talking about how stiff these were and how they didn’t bottom out very easily, so I bought them. That was a mistake. They’re already almost bottomed out when I sit on my bike. Also, it is a BATTLE getting 203mm rotors to fit these forks without rubbing up against the fork which is a real disappointment, as I can only use front brakes right now on my motorized bicycle because I need an adapter, and 203mm rotors give me the braking power I need. I eventually got it to work, but it was almost a week long project and I had to fabricate a special bracket. Headset was very difficult to install as well.
IIGRIMMII
Reviewed in the United States on June 27, 2020
The media could not be loaded.
Daniel shaner
Reviewed in the United States on June 17, 2020
This product feels very well built and I would buy it again however it has short coming. First off the shocks are very very stiff which is nice but also makes rides a lot more bumpy than my stock fork. However this one doesn't shutter front and back when i hit the brakes going 40mph, my stock ones did that at 20mph. I wasn't able to use the bearings it came with but i managed to get my stock ones and their race to fit on this. Overall very happy.
David Murphy
Reviewed in the United States on January 26, 2020
CDH 26" WITH A 100 CC ZEDA POWERED BIKE
Customer
Reviewed in the United States on June 24, 2018
Seems to be a very good value. I was a little surprised to see the red painted lettering on the sides because the products photos don't show it. These will not fit any bike, having an engine lathe I was able to machine the original fork tube and install it on my Hyper. I also think it's a little odd that there's no grommets or boots above the seals at the top of the shocks. All in all tho a good value.
Recommended Products