Your cart is empty.
Your cart is empty.Product Description
This versatile slot cutter provides a variety of cutting options. Using a countersunk bolt the cutter can be mounted at the end of the arbor to allow undercutting; great for making lock rabbet joints as well as standard slots, biscuit joints, and many more. Each bit has 3 carbide tipped cutting wings, PTFE coating and an anti-kickback design feature. The 22mm bearing provides a 1/2-Inch depth of cut and available in a 1/8-Inch, 5/32-Inch, and 1/4-Inch cutting lengths. The slot cutter, arbor and bearing are all available separately.
From the Manufacturer
This versatile slot cutter provides a variety of cutting options. Using a countersunk bolt the cutter can be mounted at the end of the arbor to allow undercutting; great for making lock rabbet joints as well as standard slots, biscuit joints, and many more. Each bit has 3 carbide tipped cutting wings, PTFE coating and an anti-kickback design feature. The 22mm bearing provides a 1/2-Inch depth of cut and available in a 1/8-Inch, 5/32-Inch, and 1/4-Inch cutting lengths. The slot cutter, arbor and bearing are all available separately.
Joseph Lafranier
Reviewed in Canada on March 5, 2023
I thought it was 1/4” shank looking at the bit In the picture compared to the half inch bearing, when it came in it was a 1/2” shank. Now I can’t use it with my battery router and have to lug around the bigger one with the vacuum. Still does it’s job but not the one I intended on getting
Andersen
Reviewed in the United States on May 14, 2021
I only received the slot cutter. There was no arbor or bearing included.
Hourglass
Reviewed in the United States on January 24, 2019
As other reviewers have mentioned, make sure you tighten the screw at the end. Cuts clean and smooth.
Cam
Reviewed in the United States on July 20, 2017
Very affordable and worked flawlessly for routering a channel to hold some thin corrugated sheet metal inside of a door.
R. Stuart
Reviewed in the United States on July 18, 2017
A good cutter. Cuts slots that biscuits fit. As already stated by others, need to tighten allen screw before using, mine needed tightening.It cut nice slots right up till it hit a couple nails that broke the carbide teeth. I used this to join oak flooring ends to existing oak flooring, (old flooring was cut off already and I needed a way to join the ends). I replaced it with the same.
Chill
Reviewed in Canada on February 4, 2017
Bit seems great. Was expecting 1/4" shank though.
S Millar
Reviewed in Canada on November 7, 2017
the item came as described
M. Stephens
Reviewed in the United States on July 20, 2014
This bit was great for the first 20 minutes of use, then the screw that holds the cutter on broke. And this was cutting poplar. First and last CMT bit.
B. Roon
Reviewed in the United States on February 1, 2013
Not a Whiteside but then only Whiteside is. Cuts a clean slot for biscuits and what more do you really need?
JacolC
Reviewed in the United States on July 9, 2012
There is no description about diameter of shank. The photo show ¼ shank so I ordered it. I need it for small router for tight spaces. It was ½ ". I keep it for the price $9 (open box).
Aemal Khattak
Reviewed in the United States on April 19, 2012
Nifty little thing that does what it is supposed to do - cut 5/32" slots. If you have a router, get this bit and you don't need to buy a biscuit joiner (most commercially available biscuits need a 5/32 slot).
Recommended Products
$27.48
$ 12 .99 $12.99
$74.99
$ 36 .99 $36.99
$37.50
$ 17 .99 $17.99