Your cart is empty.
Your cart is empty.From the manufacturer
Cressi since 1946
Cressi was founded in 1946 as a diving company rich in innovation, design, development, manufacturing. An entirely family-owned and operated Italian brand, Cressi is one of the first companies to develop innovative equipment for watersports. Over 70 years later, the commitment to innovation is still in the company’s DNA. The passion that stimulated the founders to begin their adventure is still present and, combined with the advanced technology, results in the best and most reliable products!
CONSOLE MINI SPG
The Mini Submersible Pressure Gauge luminescent dial reads from 0 to 350 BAR | 5000 PSI.
For at-a-glance monitoring of air pressure the instruments face is divided into three different colored zones: the area from 50 BAR | 600 PSI and below is highlighted in red with a solid BAR and red stripes. If the gauge is used on deeper dives, the red scale extends and fades to 100 BAR | 1300 PSI, this provides for added reserve air indication required at greater depths.
- The Mini Submersible Pressure Gauge luminescent dial reads from 0 to 5000 PSI (350 BAR) and is a must-have for any Scuba Diver.
- For at-a-glance monitoring of air pressure, the instrument's face is divided into three different colored zones.
- The blue zone is the safety zone, indicating an air-pressure from 3000 to 5000 PSI (200 to 350 BAR).
- The scale in red indicates when the air is about to end. The alert zone is indicated with red stripes and is when the air pressure is below 600 PSI (50 BAR).
- The front glass lens is made to act as a pressure relief valve. n the event of a sudden increase in pressure inside the instrument, the glass rises slightly, allowing the excess pressure to escape.
- The Instrument is housed in a small, modern shaped boot, made from polycarbonate and Desmopan, to ensures protection from shocks, scratches and ensure lightness.
- The Gauge Boot has an attachment point for a clip or lanyard.
- The Mini SPG is equipped with a 7/16" threaded high-pressure hose.
Luminiscent Dial in Global Fluo Version.
The “Global Fluo” version has a fluorescent dial that glows in low light conditions, making reading easier.
From 0 to 350 BAR | 5000 PSI
Scales in both metric and imperial. BAR and PSI.
*Global Fluo Version
The Gauge Boot has an attachment point for a clip or lanyard. The Mini SPG is equipped with a 7/16" threaded high-pressure hose.
Tobi M.
Reviewed in Germany on February 5, 2025
Das Finimeter mach deine sehr hochwertigen Eindruck und wirkt stabil.
Customer
Reviewed in the United States on January 9, 2025
I liked
Customer
Reviewed in the United States on December 10, 2024
Excelente condiciones
Client d'
Reviewed in France on April 9, 2024
tres léger
Philip Henderson
Reviewed in the United Kingdom on July 26, 2023
Good price for a good pressure gauge
Paolo
Reviewed in Italy on July 21, 2023
robusto e affidabile
Gage Mooney
Reviewed in the United States on July 11, 2023
My wife uses this with her regulator set up. it's simple and easy to read. it is accurate. She likes that it is small and does not get in the way.
Nick
Reviewed in the United States on February 13, 2023
Love the fact that there are several broad bands (Blue, Green & Red) that give you a quick reference on where you are on air. Small enough not to get in your way, I hooked mine to a retractor to keep it close to my body and reduce drag.
kimbinky
Reviewed in the United States on September 12, 2022
I really like this spg, it was a compact replacement for an older combo spg/depth gauge console I had and I am very pleased with it. It's made by Cressi, a name that I trust, which is emblazoned on a lot of my other dive gear. It is small, yet easy to read and color coded for extra clarity... even with my old eyes. You won't be disappointed.
Nicholas Jordan
Reviewed in the United States on April 19, 2022
Works well done 2 dives with. Hard to read on the surface but clear as day underwater
Sean Murray
Reviewed in the United States on February 20, 2020
I bought this as a back up for some underwater work in a 16ft tank while my computer was being serviced. Since I was in a body of water of a known depth, I wasn't too concerned about being without my computer, but I did need a way to monitor how much air was in my tank. I didn't want to spend a lot of money on a backup gauge, but I wanted something reliable that I could trust. So I was glad to see a good name brand offered at a reasonable price that would do exactly what I was hoping for. This worked out well for me. Standard size fitting attached right to my high pressure port on regulator. O-ring made solid seal. Hose was included and worked fine. No leaks. Gauge worked reliably and seemed accurate. When my computer is back in service, I will either keep this on my rig as redundant way to check air, or I will just keep in my "save a dive" kit as a back up. Please be aware that all this does is show you air pressure in your tank, it is not a substitute for a computer and it is not a complete instrument panel: it does not have a compass or a depth gauge, or a timer. But if you have need of simply checking the pressure in your scuba tank, like I did, this will work well and is a good value.
A90045
Reviewed in the United States on September 16, 2019
Low cost doesn't always equate to poor quality. For an SPG with 22 hours dive time, very accurate and durable. Really can't beat it up enough, its size also keeps it right in your palm. Great product, definite must as a backup or even 0-60 feet.
Iván
Reviewed in Spain on November 15, 2016
Muy buen producto, envío muy rápido y eficaz. La única pega que de 0 a 50 bares no tiene escala pero por lp demás perfecto, pequeño y manejable
Recommended Products