Works perfect for my new black sink with the old garbage disposal

Perfect! Worked perfectly with our GE disposal. Solid!! Heavy and better quality than I expected or have seen from a product in this price range. Would buy again if I had another sink. I don’t impress so easily with something so simple, but we’ll done!

The color was not as described, more a dark brown with poor texture. Looked like it was spray painted, and badly at that. We returned it.

I gave this item 5 starts for quality and value. It is very well made and a great value for the price. The only negatives i might have are that the actual "flange" part that sits in the recess in the sink bowl is pretty thick and causes just a bit of water to pool in the sink behind the edges. If they had tapered the edges just a bit it would be perfect. I cannot state yet how long the finish will last as it is made of brass and plated, not stainless but only time will tell on that.

We have a black granite single bowl sink, that we love, but the ring that comes with disposals is always stainless finish and normally with its name engraved on it in huge letters. We knew it would look awful, so bought a black flange and stopper set at our local big box store. Our plumber installed it, it lasted about a month before flaking began. The flaking continued, so we had our plumber put the original one on to try to like it. Did not like it, found this one, had it installed and it has not shown any sign of flaking. Very pleased with it and our sink looks great again!

The finish on this will not last. It looks good initially but after a few weeks the finish began to wear off. It now looks terrible! The cheap plastic one that came on the Waste King still looks fine and is much older than this overpriced flange.

I started to install our new Waste King 3300 which ships with a cheap plastic flange stamped with "Waste King" on the rim when my wife intervened. She couldn't stand the thought of looking at "waste king" in her new kitchen sink. The waste king alternative flanges with the EZ mount fitting were only in white or bisque - drat. After some searching, I came across this unit which appears to be identical to the waste king flange, but much better quality and much better price than comparable Westbrass custom flanges. This unit is 100% metal so it's quite sturdy. I think it is produced by the same manufacturer as waste king (Anaheim). In any case, we're pleased because we now have a flange that matches the finish of our sink that doesn't scream "waste king" !

I moved in to a new home recently and found that the existing disposer was in need of replacement. Instead of replacing just the disposer, I decided to go ahead and completely replace the entire sink, including the faucet, flanges, and disposer. I decided to purchase most of these items on Amazon due to the excellent prices and free Prime shipping. However, I was troubled by the lack of documentation and details regarding the compatibility of the different parts. I'm writing this review along with a review of the disposer I purchased in an effort to fill in these gaps for future purchasers.For the disposer, I went with the ; unfortunately, the flange that comes with the disposer has a highly reflective chrome finish which will not be suitable if you want to coordinate with faucet hardware that isn't also chrome. Though there are many custom flanges to choose from, the Waste King will not be compatible with most of them since it utilizes the EZ Mount system for attaching the disposer to the sink. This assembly is not compatible with the majority of the custom finish disposer flanges found on Amazon and in most other stores; most are intended for Insinkerator (ISE) disposers.There is an adapter kit available (), but I would highly recommend only using this adapter if you are replacing an existing ISE disposer and want to use the hardware already attached to your sink; if you are starting from scratch you would still need to purchace the ISE mounting hardware in addition to the adapter.I should also note that there are some Waste King branded flanges for sale, but the only ones I found that are compatible with the EZ Mount system have plastic finishes, like white, biscuit, etc. Waste King flanges that offer a metal finish are only for Waste King disposers that use the very different 3-bolt mounting system, which are a bit more expensive than the EZ Mount variety.If you plan to start from scratch with all new components as I did, using an EZ Mount disposer along with a suitable disposer flange like the Waste Maid will simplify your installation and help you avoid headaches and delays caused by ordering incompatible parts. If you insist on a certain brand of disposer flange you will have to get the flange, ISE mounting hardware, and the adapter. This should work, but at a much higher cost than the Waste Maid flange alone.As far as the flange itself is concerned, I was impressed with the quality of its manufacture; it's quite heavy and solid, unlike some of the ISE flanges I've handled. The machining of the threads is very smooth and I had no trouble screwing the disposer's mounting hardware onto the flange during installation. So far the finish seems to be holding up well, but it should be expected that a disposer flange will take some abuse and may not look perfect forever; however, in this case there isn't much of a finish to worry about anyway, so I expect it will look nice for quite some time.My only complaint is that the stopper had some minor nicks and dings, primarily on the "handle" portion; it looks as if it may have been dropped on a concrete floor. Also, it does not seem to sit very tightly in the flange; it doesn't leak or anything, but it seems to fit so precisely that degradation in the rubber seal could cause a leak in the future. These are very minor issues and aren't really noticeable, but they do make it seem like the stopper was used instead of new; that being said, I do not feel that they should reduce this product's rating.In conclusion, I would not hesitate to buy this flange again. If you're installing a new EZ Mount disposer and need a custom flange, this is the way to go.