Your cart is empty.
Your cart is empty.When the original fuel filler neck inlet check valve fails, the dealer requires replacing the entire fuel tank. This Dorman OE FIX solution allows direct replacement of only the failed valve, and strengthens materials to prevent future failures.
eric b
Reviewed in the United States on February 22, 2025
Works on a 08 h2 gas tankMake sure you sanding well the surface to make it flat and flush or you won't get a goo seal at the top when you tighten it
OG
Reviewed in the United States on January 9, 2025
Good part recommend this 100%
Ali Alqallaf
Reviewed in Saudi Arabia on June 16, 2024
فوهة خزان وقود مناسب للهمر H2
us army ltc 05
Reviewed in the United States on May 20, 2024
This is the only filler neck repair repalr kit that works by desighn the flapper door is not to stiff like on some others and or resticted flow if you want your filler neck fix right the first time then get this one also be very carefull to only cut on the outside of the old failing filler neck just above where its leaking as to not make your whole to big cut only on the outside of the tank and take your time. 2004 GMC envoy your good to go.
Doug Schneider
Reviewed in the United States on February 16, 2024
This worked good on my 2004 Trailblazer Ext. The only negative I have on this is it didn't have a mark on the outside to know which way the checkvalve needed to go. Nothing you can't fix with a marker.
wzw55w
Reviewed in the United States on December 20, 2024
Mechanic resolved leak with thus after market tank/ neck replacement.
David
Reviewed in the United States on October 8, 2024
An intellectually challanged individual had previously attempted to repair the leaking Fuel Filler Neck Inlet following a youtube video made by another such person not only endangering the lives of anyone riding in the vehicle but also failing to stop the leak, before I bought the vehicle.Once I cleaned that mess up this item worked perfectly.
Roy Church
Reviewed in the United States on August 10, 2023
Wish I had found this sooner. Saw a YT video of this used to repair a different GM vehicle than mine. Found in the Amazon reviews that it had been used for a repair on a close match for what I have, mine is a 2003 Chevy Venture. The fuel tank is close to unubtainium. Has been repaired using this part and is now a usable vehicle.
Breanna U.
Reviewed in the United States on July 29, 2023
I had the plastic neck on my 2006 Jeep wrangler gas tank snap off. (The plastic gets brittle with age) so I drilled the hole out a little bigger 1.5 inches and installed this filler neck. It installed tight and seals up tight so it should work great! Very happy to not spend $500 on a new tank, with plastic parts. I used a step drill bit to drill the hole in the fuel tank and it worked great! So buy one that goes to at least 1.5 inches. Then smooth outer edge and done. Took me all of 10 minutes start to finish.
Recommended Products
$71.54
$ 33 .99 $33.99