Your cart is empty.
Your cart is empty.This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Jeep Cherokee: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999] - [Jeep Comanche: 1991, 1992] - [Jeep Grand Cherokee: 1993, 1994, 1995, 1996, 1997, 1998] - [Jeep TJ: 1997, 1998, 1999] - [Jeep Wrangler: 1991, 1992, 1993, 1994, 1995, 1997, 1998, 1999]
Kurt
Reviewed in the United States on August 30, 2024
One of the most important parts was missing the gasket that mounts the manifold to the head
kyle
Reviewed in Canada on August 14, 2024
Designed to reduce cracking by adding flex joints , three months and about 2500 kms in and it cracked the first time , removed , welded re installed , 1.5 years later and it cracks again in a different spot , so once again it will be coming off . Most likley to be replaced this time ,biggest issue was purchacing from Amazon as i was not able to get warrenty like i would through my local autoparts store , this part has less then 6000 kms on it in total . Very dissapointed in the quality .... Live and learn i guess , at least it was my personal vehical and not a customers .*It does fit properly and everything lines up
Dave O.
Reviewed in the United States on April 5, 2024
Great quality, and well built. I did use both, the intake/exhaust and donut gaskets, with no issues. Perfect fit.
Garry
Reviewed in the United States on April 28, 2024
Fit great on 97 wrangler 4.0 used supplied gasket seams to be working ok no leaks
Chad Carter
Reviewed in the United States on September 17, 2021
Fairly easy install on my 1997 Jeep Cherokee. Flex joints are an improvement over the factory unit so that the manifold doesn't crack like my original. Middle of the road construction with OE fit and function. There are cheaper similar units out there, but I wanted to go with Dorman as they are trusted much more than the "no-name" brands. I advise ordering the rest of the manifold hardware bolts while you are at it. It does come with the gasket, donut gasket and lower hardware though.
Dung
Reviewed in the United States on August 6, 2020
Firstly, this fits on a 1999 Jeep Wrangler 4.0L despite Amazon saying otherwise.The main complaint I have is that the reducer/ring that goes on the part of the manifold that connects to the flange/rest of the exhaust system does not fit well at all, and because of it proper fitting at the flange is affected and may cause an exhaust leak.Tips for those that care:Install the manifold at the flange first, otherwise getting those two bolts lined up is going to be nearly impossible.When reinstalling the intake manifold, make sure it's seated properly on the two pegs that stick out of the engine and snug up (not torque) all of the bottom bolts. Once all of the bolts have been installed and snug, then torque to spec in the correct pattern in order to unsure a proper seal. This is very important and will save you a lot of time in redoing it when your engine goes to max throttle as soon as you start her up. Ask me how I know...
Client d'
Reviewed in Canada on July 30, 2019
Livraison rapide belle qualiter reste a linstaller
Sharon and Charles
Reviewed in Canada on February 25, 2019
Amazing product great price and quick delivery
Kayla Casto
Reviewed in the United States on November 26, 2017
Easy assembly. Everything lined up great. Much nicer and better made than stock exhaust manifold. Gasket was included and works great. I bought this for my 1999 Jeep Wrangler Sport. Would buy from this company for future vehicles.
B
Reviewed in the United States on May 8, 2014
Bought for my 99 Jeep Cherokee. I had a shop install this as they gave me a good deal and i wasn't too keen on removing the old one myself. I rarely go to shops, but again, good price so why not right? They said the operation was a success, however, now that it's installed it's making an annoying tick-tick-tick-tick -tick under acceleration. Not at idle, not even at lower acceleration, really just at half to full throttle.I assumed it was an exhaust leak but the shop is a good exhaust shop and they say that the ticking is coming from the rear flex part of this manifold. .... i really REALLY hope that is not the case but they advised that i take it on an extra long road trip to get it nice and hot as there may be a bur from the weld that's causing the ticking, and with it really hot it might burn off or whatever. Also when i shut the engine off it ticks like a time bomb.So quality? I'm going to do my own tests now and figure out if it is indeed the manifold or if there is an exhaust leak. Otherwise it performs fine. Just really annoying that it sounds like a sewing machine sewing glass.Also bought it with the magnaflow hi-flow cat, and dynomax cat back, and new NGK 02 sensors. Not overly impressed with the exhaust, but it's not bad. Slightly more responsive throttle, and fuel economy may have gone up.I'll add a comment when i find out where and what the ticking actually is if it fix it.
Ayesh
Reviewed in the United States on January 16, 2013
I received this product with in 2 days, very fast delivery, so 5 points for that. Steel exhaust manifold is same fitment with OE part. Great work by Dorman brand (but box has sticker- made in China). New product came with 4 pcs washers, 2 bolts and nuts. Those are perfect. But gasket is cheap quality, so I used Fel-pro gasket (part # MS 94790). And exhaust seal is no way to fit with this new manifold (seal is small), so I used old OE manifold seal. Last one week I'm running my 97 Jeep Wrangler with this great Dorman new exhaust manifold, during summer in this middle east temperature increase till 45-55 Celsius degrees and lest see how this product quality. So I will update this post product quality and durability later.
Recommended Products
