Your cart is empty.
Your cart is empty.This engine cooling fan resistor kit is designed to match the original hardware required to repair the cooling fan on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Ford Contour: 1995, 1996, 1997, 1998, 1999, 2000] - [Ford Focus: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007] - [Ford GT: 2005, 2006] - [Ford Mystique: 1995, 1996, 1997, 1998, 1999, 2000] - [Mercury Cougar: 1999, 2000, 2001, 2002] - [Mercury Mystique: 1995, 1996, 1997, 1998, 1999, 2000]
ProfessorWizard
Reviewed in the United States on February 18, 2025
Customer complained in tge summer he hated driving this little car fir if he was in stop and go traffic it over heated. Had it at several shops, always needed a new set of fans or a new computer. A simple volt/ohm test and yes it is defective. It is nice to see one may purchase some parts at a fair price these days. Not always cheaper of of the same quality but must of the time it is the way to go.
Nestor
Reviewed in the United States on August 28, 2024
worked great thanks
R
Reviewed in the United States on October 24, 2024
Replaced OEM resistor with no issue, fit and function were good. Fixed my heater fan; I now have all speeds under my control (1-4); and not just full blast (4)
Brian M.
Reviewed in Canada on January 3, 2024
Wonderful
Elii Martz
Reviewed in Mexico on October 2, 2023
Quedo perfecto para lo que necesitaba. Llego muy rápido.
raymundo ballesteros
Reviewed in Mexico on February 11, 2022
le puse varios, de diferentes marcas y no se me quitaba el problema de que no encendía los ventiladores, hasta que le puse este y funciona muy bien, nota se mando a revisar la computadora antes 2 veces y salía bien, ya con este quedo al 100
Coalton
Reviewed in Canada on September 15, 2020
Worked good, easy install and came with the connectors.
Naji
Reviewed in Canada on May 30, 2019
I use it on ford focus works perfectly
Nancy E.
Reviewed in the United States on August 17, 2018
Went in pretty easy..if you follow the electrical wiring down, you will find attachment points that are just plastic plugs you can gently pull/pry out...be careful not to break them! We ended up soldering connecting wires, and using heat shrink tape over soldered connection. Solid part..fan working much better now!
Joshua Minor
Reviewed in the United States on October 5, 2018
Bought for my 01 Ford Focus and just realized today that with AC off car was starting to overheat... meaning this past has failed less than a year since install. Possibly failed earlier than today and I just never noticed it too!
JK
Reviewed in the United States on October 24, 2017
The Focus was overheating in stop-and-go traffic when the AC was off. Multiple Youtube videos suggested that replacing this part would fix the problem, and they were right.Easy 5-minute job to swap the resistor assembly itself. Easy to cut off the old ruined connector from the very end of the wiring harness. Major pain to work with the little stubby wires in the wiring harness (Ford made them juuuust long enough to reach the resistor assembly), strip the ends, and crimp on the wire connectors. Ended up using a couple ( instead of the crimp types included in the kit, which were much easier to work with in the tight space and with the wiring stubs--no need to strip the wires and no need to hold the wires just exactly right for crimping.Problem solved, radiator fans come on when they should. Kit includes everything needed, but I'd recommend using other wire connectors to make the job fast and easy.
wwj
Reviewed in the United States on February 3, 2014
My original Ford part literally rusted apart rather than fail. Used the original Ford pigtail with no problems. Resistor fit in the blower opening no problem. Two words to the wise, when removing original unit, be gentle, as the plastic fingers that hold this unit in, get brittle over the years from all the heat. Second advise, use Ford Motorcraft, Part. No. XG-3-A Dielectric Compound on the prongs of the Resistor that the plug goes onto. The original Ford pigtails have a habit of melting. The Dielectric Compound can help prevent this. Dorman Part Made in Taiwan.
Stephen Norris
Reviewed in the United States on December 7, 2012
This was cheaper than the equivalent Ford product.It did not fit exactly as the OEM one did but I think is OK.It came with the wiring harness which is great - that part alone from Ford is more than the entire assembly form Dorman!Nothing to do with the product (I don't think) but I switched out my old one because I was having problems with overheating and radiator fans not turning on properly. It did not solve my problem!Hope this helps,Steve
Recommended Products
$107.90
$ 52 .99 $52.99
$12.99
$ 6 .99 $6.99
$80.55
$ 36 .99 $36.99