Your cart is empty.
Your cart is empty.
Specification:
Item Type: DPDT Relay Module
Input Voltage: DC 5V (5V version), DC 6-24V (12V version) (optional)
Module Working Current: Forward 2MA, reverse 60-70MA
Load Current: 5A maximum (motor Control Mode: Low pulse control
Size: Approx. 39.5 x 33.3 x 23.3mm / 1.6 x 1.3 x 0.9in
Pin Description:
V: Power positive
G: Power negative terminal and ground terminal;
T: input (0.2-2 seconds low pulse).
NO1: Relay normally open port
COM1: Relay common port
NC1: Relay normally closed port
NO2: Relay normally open port
COM2: Relay common port
NC2: Relay normally closed port
How to use: When the power is turned on, the relay is turned off. Click the port (T port) to pull in the relay, click the relay to release again, and so on.
Package List:
1 x DPDT Relay Module
J. S.
Reviewed in the United States on October 24, 2024
I needed to run a winch motor in both directions, so that means reversing the polarity on the motor. This latching relay was just the ticket for that. I've been using it for a month or so with no problems. Make sure the terminal block screws are tight and provide some stress relief on the wires so they won't pull out.
Recommended Products
