Your cart is empty.
Your cart is empty.
Product parameters：
Product Size:4.52*8.77*1.96（in）
Net weight:1.5KG
Package Size:42.20 x 17.50 x 7.60（CM）
Gross weight:1.90KG
Shaft: 400mm
Clamping: 38-42mm
Single stroke: 0-60mm
Substrate: Aluminum alloy
Weight: 1.5KG
Parameters of flat pliers:Dedicated to electric drill stand
Shape: flat mouth
Material: Iron-nickel alloy
Maximum opening of aluminum alloy material: 65-70mm
Center distance between the bottom two fixing grooves: 90MM
Maximum clamping distance: 68mm
Fixing screw aperture: 10mm
Electric grinding jaw range (35-38mm)
Electric drill jaw range (38-42mm)
High Jaw: 20mm
Features:
1.Equipped with a rubber sleeve, the electric drill is clamped more firmly, and the single hole is only one smaller than the double hole.Bracket height fixing sleeve (designed with bracket height fixing sleeve, which can be adjusted according to working height and drill length)
2.The bottom of the aluminum alloy base (with desktop fixing screw holes, more convenient and safer operation, the bottom surface is designed with expansion slots, which can be installed with vise or mold).
Package list:
1 * Single hole drilling platform1 * 2.5 inch flat pliers
J. D'Amato
Reviewed in the United States on December 27, 2024
The drill press stand was received well packaged along with a very brief instruction sheet for assembly. It did not take long to assemble the drill press stand however affixing the clamp to the drill press base required some additional work. The delivered hardware for affixing the clamp to the drill press base consisted of (2) 5/16"x1-1/2"bolts, (2) 5/16" hex nuts and (2) 5/16" ID x 5/8"OD round flat washers however the flat washers did not fit within the allocated channels on the underside of the drill press base. To tighten the clamp to the base required access to both the top of the bolt on the topside of the base and also the underside of the base to hold the nut while tightening since there was no lock washer. This was extremely inconvenient. The solution to the problem was to grind off ~1/16" on opposing sides of the round washer then use a cyanoacrylate glue (Crazy Glue) to attach the washer to the nut. A weld would have been better. The washer-nut combination now acts as a application specific lock washer-nut combination and to affix and tighten the clamp to the drill press base requires access to only the top of the bolt on the topside of the base. Once installed, the clamp could be easily repositioned for drilling.Since the instruction sheet was mostly pictorial that did not include showing a lubricant, a drop of oil on all joints and slides made drilling a little easier. And as a final comment, the plastic Allen wrench holder on the side of the drill mount was inadequate and the Allen wrench would consistently fall off. For the price of this drill press stand and for someone who is very restricted on work space area, I am very satisfied.
Recommended Products
