Shopping Cart

Your cart is empty.

Your cart is empty.

D-Tap 1×3 Power Splitter Adapter with Voltage Display & 1/4 Mounting Screws for V-Mount/Gold Mount Battery,Camera Cage,Video Transmission, Monitor, BMPCC 4K/6K, etc.

Free shipping on orders over $29.99

$26.90

$ 12 .99 $12.99

In Stock

1.Model:Coiled Cable Version


About this item

  • High Customization: This D-Tap splitter is designed to expand multiple D-Tap power outputs. 3 channels of intelligent shunt, no interference with each other, can be connected to the V-Mount/Gold mount battery, and can provide stable power supply to up to 3 independent devices at the same time.
  • Voltage Display: With real-time voltage display, the battery level can be understood through the voltage display during the shooting process to ensure the normal progress of shooting.
  • Easy Installation: It can be easily attached to the camera rig or equipment with 1/4" mounting screws. Hex wrench is included for tightening 1/4 screws.
  • Safe And Reliable: The splitter supports a maximum current output of 8A. Built-in smart chip, with 149 Fahrenheit over-temperature protection, over-current protection, short-circuit protection, input reverse protection, output anti-backfill protection.
  • Specifications: Straight cable length 23.62inch . Input/output voltage: 11-16.8V. Operating temperature: -4°F~149°F.


The KOERTACOO D-Tap 3-way splitter is designed to extend the D-Tap interface of your V-mount/Gold mount battery to support all devices with a d-tap port. With 1/4" mounting screws that can be easily attached to your camera rig and equipment, it is the best choice for your shooting power solution.
Parameter:
Input/output voltage: 11-16.8V
Power Cable Length: Straight cable length 23.6inch
Mounting Screws: 1/4" Screws
Operating temperature: -4°F~149°F
Function:
1. It has the function of input reverse protection, when the input is reversed, the product will automatically protect and close the output, so as to protect the equipment.
2. It has the function of output anti-backfilling, and the output interface only outputs but cannot be input. The three outputs do not affect each other, and the devices do not interfere with each other.
3. With over-temperature protection function, when the product temperature reaches149℉, the product will protect itself and display OFF. It starts automatically when the temperature returns to normal temperature below 104℉.
4. With over-current protection function, when the current is too large and exceeds the rated current, the product will automatically turn off the output and display "OFF".
Package Include:
1 x KOERTACOO D-Tap Splitter.
1 x Six Inner Angle Wrench
1 x Storage bag.


Ryan Brock
Reviewed in the United States on March 9, 2025
Great build quality. Gives more functionality to your D-tap rig set up.
Mike
Reviewed in the United States on March 8, 2025
No issues. Properly gauged wires, good fit on the dtaps. Good length. Voltage meter is a nice touch but these days most v mount I use already have voltage meter built in.
B. Hashimoto
Reviewed in the United States on February 28, 2025
Works great! No issues with multiple devices plugged in. Allows for cable simplicity and saves on setup time on your rig.
Poc Network // Tech
Reviewed in the United States on January 22, 2025
So recently upgraded a V-Mount battery plate to something that had more connectivity for what was needed. But unfortunately the positioning of the DTAP made it difficult for the batteries we use. At least for the cables we use. I solved that by bringing connectivity away from that hot mess and opened up the ability to connect more than one. Perfect!This all the issue just fine, and could be so helpful when it comes to powering multiple devices on a rig. Simple solution!
Roberto R.
Reviewed in the United States on January 20, 2025
Love the voltage reading as more d tap are plugged in. Gives you real time info on how much power devices are drawing. Has a screw to attach to a cage or other accessory. D tap locks in solidly on my batteries I tried. Made of plastic but doesn't feel cheap. Recommended!
Pcrispy
Reviewed in the United States on January 18, 2025
First of all, I love the look of this and the function. The LCD voltage display looks awesome, and aside from a pretty large logo on the one side, this whole thing looks very nice. The outputs work well to power my camera, monitor and focus motor, so it seems like it should be an easy 5 star review. The downside of this is that the plastic is not the most rugged. It looks beautiful, but with the stress of plugging and especially unplugging a DTAP connector, it puts a lot of stress on the mounting point which is where the thinnest plastic is at. I noticed some flexing in the two pieces where the plastic come together near the screw, so I used a tiny screwdriver to open the joint a little and added super glue to secure it even more. With the two pieces bonded together instead of just plastic clips, I hope that it will hold up better and prevent cracks.
TheJesseChambers
Reviewed in the United States on January 14, 2025
The Koertacoo D-Tap 1×3 Power Splitter Adapter has been a game-changer for my video rig. This device seamlessly powers multiple peripherals with incredible reliability and efficiency.What I Love:High CustomizationThe ability to power up to three devices simultaneously without any interference is a huge win. Whether I’m running a monitor, light, or wireless transmitter, the power delivery is stable and dependable.Voltage DisplayThe real-time voltage display is a lifesaver! Knowing my battery status during a shoot ensures I never run out of power at the wrong time. It’s a small feature that makes a big difference in maintaining workflow continuity.Easy InstallationAttaching the splitter to my rig was effortless. The included hex wrench is a thoughtful touch, making the setup quick and secure with its 1/4" mounting screws.Safety FeaturesWith its smart chip and multiple built-in protections (over-temperature, over-current, short-circuit), I trust it completely to safeguard my gear. The maximum current output of 8A is perfect for demanding setups.Reliable SpecificationsThe straight cable length of 23.62 inches is versatile for rig placement, and the input/output voltage range (11-16.8V) works beautifully with my V-Mount battery. It’s also designed to handle challenging conditions, performing well in a wide operating temperature range.Bottom Line:This adapter is a must-have for anyone using a video rig. The blend of versatility, safety, and real-time monitoring elevates it far above standard splitters. The Koertacoo D-Tap Power Splitter is a robust and reliable tool that has quickly become a cornerstone of my setup. Highly recommended!
Jamie
Reviewed in the United States on January 14, 2025
I really like this d-tap splitter (more than my much more expensive Blue Kondor one). It's compact and secures easily to my camera rig. The connectors and cable are pretty robust. And the reverse polarity protection is nice because it can be easy to accidentally screw up the direction on d-tap connectors.
Recommended Products

$19.00

$ 9 .99 $9.99

4.3
Select Option