Shopping Cart

Your cart is empty.

Your cart is empty.

E1840P Sloppy Stage 2 Camshaft Kit for 1999-2013 Gen 3/4 LS 4.8 5.3 Vortec Trucks (Include Cam, Lifters and Trays, Pushrods, Gaskets)

5.0 Write Review
Free shipping on orders over $29.99

$380.99

$ 99 .00 $99.00

In Stock
  • E1840P sloppy stage 2 cam specs: 228/230, 585"/.585" 112 LSA, 3-bolt cam
  • Camshaft kit include: 1 x camshaft, 16 x ls7 lifters with trays, 16 x beehive valve springs, 16 x valve seals, 16 x 7.400" 5/16 chromoly pushrods, 2 x ls1 head gaskets, 1 x timing cover gasket set, 1 x crank bolt
  • LS cam kit fit for: 1999-2013 GM V8 Truck or SUV 4.8 5.3 Vortec engine
  • Note: If you will install our cam and lifter kit in an engine originally equipped with a 1-bolt camshaft, a 3 bolt conversion kit will be required


Product Description

E1840P Sloppy Stage 2 Camshaft Kit for 1999-2013 Gen 3/4 LS 4.8 5.3 Vortec Trucks

ls cam kit
camshaft
Part Number
  • E1840P
  • E-1840-P
Common failure symptoms of camshaft

  1. Engine misfire or slow startup
  2. Sluggish acceleration
  3. Unstable idle speed and severe shaking
  4. Excessive fuel consumption and emissions

E-1840-P Sloppy Stage 2 Engine Camshaft

  • Engine Type: LS-Series
  • Camshaft Type: Hydraulic Roller
  • RPM Range: 2200 to 5400
  • Cam Gear Attachment: 3-Bolt
  • Lobe Separation: 112°
  • Intake Centerline: 108°

  • Intake Duration: @ .050": 228°
  • Exhaust Duration: @ .050": 230°
  • Intake Valve Lift: .585"
  • Exhaust Valve Lift: .585"
  • Advertised Intake Duration: 283°
  • Advertised Exhaust Duration: 286°

The stage 2 camshaft kit will fit your 1999-2013 GM V8 Truck or SUV

ls cam kit

Engine Rebuilt Kit Include:

  • 1 x Camshaft
  • 2 x LS1 Head Gaskets
  • 1 x Front Timing Cover Gasket Set
  • 1 x Harmonic Balancer (Crank) Bolt
  • 16 x LS7 Lifters with trays
  • 16 x 1218 Springs (.600" lift)
  • 16 x Valve Seals
  • 16 x 7.4 Pushrods
springs

Drop-In Valve Springs:

Outside Diameter of Outer Spring (in): 1.290 in. ｜ Coil Bind Height (in): 1.140 in.

Damper Spring Included: No

Install Load: 130lbs ｜ Install Height: 1.800"

Open Height: 1.175" ｜ Open Load: 318 lbs

Spring Rate (lbs/in): 313 lbs./in. ｜ Inside Diameter of Outer Spring (in): 0.885 in.

when do you need to replace your camshaft