Your cart is empty.
Your cart is empty.Product Description
Multifunctional Tail Light
- Outlet: Six-core wire
- Specification13 x 3.1 x 4CM without bracket
- Voltage: 24V-48V
- Function: Night running lights, car lights, left and right turn signals
- Weight: 141G
- Material: ABS+LED
- Line length: 1.5 meters left
Bike Light Horn Two-in-one LED Headlight
- Outlet: Three-core wire
- Specification: 6.2 x 5 x 7.3CM
- Weight: 104G
- Function: Headlights, horns
- Line Length: About 1.5 meters
- Material: ABS+LED
Horn + Headlight + Turn Signal Button Integrated
- Outlet: Six-core wire
- Specification: 5.5 x 5.5 x 2.5CM
- Weight: 83g
- Material: Nylon
- Line Length: About 1.7 meters
Light Sets Connection Wires
- Product net weight: 13g
- Wire specification: 22AWG high temperature resistant soft silicone wire
- Length After Folding: 140mm
Function: Front Light/ Rear Light/ Turning Light/ Brake Light/ Horn
Package Including:
Ebike Head Light (with built-in horn): 1pc;
Ebike Tail Light (include brake light, turning light): 1pc;
Switch(Light, turning and Horn): 1pc;
Connection wires: 1pc
Important Notes:
1: This product is not suitable for Bafang or TSDZ mid-mounted motors.
2: This product needs to be connected to the same battery as the controller, otherwise the braking function cannot be activated.
3: Connecting to the brake requires the controller to be a low-speed brake.
Mark
Reviewed in the United States on March 12, 2025
I like the kit, however my son's razor quad does not have a brake controller. Not sure how to wire it to have the brake light come on when the headlight comes on.
101101
Reviewed in the United States on January 30, 2025
We cut off the connectors to the controller and replaced with AT-60 connectors to hook it up to our controller.Making the connections is fairly self explanatory - the brakes only connect in one way.So far, it is working well and not draining the battery noticeably.
Lee Bates
Reviewed in the United States on January 14, 2025
Easy to hook up, with little electrical skills, great value everything functions properly
Customer
Reviewed in the United States on June 11, 2024
This kit is great, worked well on my MX650. Did require some basic electronics/wiring understanding to attach since the instructions are not great. some of the leads were not needed in the connector for my setup. I suggest searching youtube videos on how to install if you don't know what to do and you'll be fine.
Ken
Reviewed in the United States on December 16, 2024
Installed on a 36 volt system had to change how it was wired up to the bike due to the plugs being different but after figuring that out it works beautifully nice and bright
TJ
Reviewed in the United States on November 15, 2024
i ordered this item when it arrived and i installed it the headlight works but the tail light and turn signals dont work , i got a replacement sent to me , same issue BAD PRODUCT AND SHOULD BE DISCONTIUED
Madmich
Reviewed in the United States on October 15, 2024
It came without any instructions, but as others said Youtube videos explain it all. The connector didn’t match my sons Razor MX 650 so you will need a solder gun and some basic electrical knowledge. But all together not to bad. The lights are bright, but the front beam is kind of narrow. The turn signals in the back are barely noticeable. For what I wanted though it’s a cool kit.
J
Reviewed in the United States on September 20, 2023
Wiring was fairly easy, i didnt have power connections provided on my controller, so i had to tap into the battery for them. Only issue i had, but not the fault of the lights. Horn is very loud, front and back lights are bright. Signals work nice. Really cool upgrade for about a 45 min install. Most of it spent dressing the wiring harnesses along the bike. Worth it, and a good buy.
Recommended Products