Your cart is empty.
Your cart is empty.EAST COAST RESIN EPOXY is a SUPER GLOSS , clear polymer that is used for coating wood, veneer, metal, stone, painted surfaces, table tops and many other surfaces to give a rich super gloss look and protect from scratching and air humidity. New improved UV resistance formula. Surfaces coated with this product are very durable, water resistant and easy to care for. 16 oz Epoxy kit contains two parts: resin 8 oz and hardener 8 oz, which are mixed together at a 1 to 1 ratio by volume. Work time is 30-35 min. Detailed instructions are included with each kit.
Jonas4321
Reviewed in the United States on February 12, 2024
I needed to make several custom coasters as gifts and needed a product that would work as it claimed. I needed handling time (so if it hardened too quickly, I would be in trouble), bubble-free (I used a heat gun) and I needed them to be 100% hardened in 24 hours.I didn't have time to do a test run, so I mixed 20ml of each for the recommended 5 minutes and used 2 cups as the instructions called for (measuring and mixing in one, then transferring to a second to continue mixing). As with every epoxy I have used, there were tons of tiny bubbles in the mixed product (it's almost frothy), but these worked themselves out as I used a heat gun on low for about 10 minutes.I had poured too much into one coaster, but with the longer working time I was able to use a disposable pipette to remove some epoxy without any difficulty.I have a food dehydrator that I use to dry 3D printing filament that runs at 106 degrees F. This worked perfectly to completely cure the epoxy in an 8 hour overnight.I'll be buying more of this stuff when I use it up!
Ralph Roth
Reviewed in the United States on April 11, 2024
mixed as instructed 50/50 and after 10 days it's still gooey and sticks to your fingers when trying to handle a part, I'v done numerous projects using resin and hardener, but this was the worst !
Dale
Reviewed in the United States on April 10, 2024
Product preforms well. Easy to apply and has good working time. Not having great experience with epoxy and it's long term performance, I'm confident this product will preform well,if it doesn't I will give further assessment provided Amazon allows
michael s goscha
Reviewed in the United States on February 9, 2023
Used it for the finish on a pool cue
Kevin
Reviewed in the United States on October 17, 2023
I really like this epoxy I am using it to line an old aluminum water jug from ww2 it has been a tedious project. But follow the instructions and you will be fine. I have been mixing smaller amounts and mostly eyeballing the amounts and it has been fine. The epoxy drys crystal clear and extremely shiny! My project has caused some small are bubble but isn’t really a problem form me. The epoxy has a slight smell more when it’s drying but it does go away. Very happy with this product will purchase it again.
Harvey S. Bellamy
Reviewed in the United States on December 7, 2022
Worked as instructions stated it would. Cured in my garage in 24 hours, leaving the bookcase top looking like glass. Very satisfactory.
VanillaMallow
Reviewed in the United States on January 4, 2022
I have tried many other brands of epoxy resin. East Coast resin is by far the best product I have used. Easy to mix, (also forgiving in case I didn't get my measurements perfect,) plenty of pot time prior to pouring.Even in cooler temps in our house, resin pieces set up overnite, then pop easily out of silicone molds, let cure 2 days, and good to go.Very clear resin, strong and durable. I did some embedded things, including candysprinkles which worked great.Not much odor when mixing, tho I do open a window just for adequate ventilation.Holds details from molds very nicely.I experimented with adding some food coloring to mixed resin, worked like a charm, no separating, came out nice colors, dried and cured just great.Will continue to order East Coast resin kits.
DW
Reviewed in the United States on February 6, 2020
I have used the product to glue carbon fiber, I do not know what happened, I mix the product 50% x 50% and it does not dry, not even to the touch, I have decided to put more catalyst but still the same, only dry on some sides, really I do not know what's happening
Recommended Products
$206.99
$ 99 .00 $99.00