Shopping Cart

Your cart is empty.

Your cart is empty.

EURO TOOL (PIN-225.05) 1.2mm & 1.8mm Wire Rounder Set

Free shipping on orders over $29.99

$14.99

$ 7 .99 $7.99

In Stock
  • Specifics - This wire rounder set includes the EURO TOOL PIN-224.00 Wood Top Pin Vise and two cup burs. The cups measure 1.2mm and 1.8mm at the tip. The pin vise has a wood handle and knurled neck for superior comfort and grip.
  • Uses If you are a craftsperson who routinely works with wire then this tool is a must-have. This tool is typically used to smooth and round the sharp ends of wires.
  • Superior Quality EURO TOOL products are the pinnacle of quality, and stand alone at the top in the industry of craft, hobby, DIY projects and jewelry tools. Make sure your tools have the name EURO TOOL.


This set from Eurotool includes a Wood Top Pin Vise and two cup burs. The one and only tool to effectively de-bur the end of a wire after it has been cut! Just what you need if you make your own ear wires or work with a lot of wire in your jewelry. Round Wood Top Pin Vise is more comfortable than the conventional hex head vises. Pin Vise features double-ended chucks from zero to 3.3mm capacity. Measurements: Zero to 3.3mm capacity Pin Vise is 4 inches long. Use the 1.2mm cup bur to file wire thinner than 18 gauge. Use the 1.8mm cup bur to file thicker wire up to 14 gauge. Quantity: 1 Set (Includes 1 Wood Top Pin Vise and 2 Cup Burs) Example photo shows rounded wire on left and wire that has not been rounded on the right.


YELIXA
Reviewed in the United States on January 12, 2025
No le hace nada a la punta de los alambres
sumiohagi
Reviewed in Japan on February 23, 2024
とても使いやすいです。
Brandy Spears
Reviewed in the United States on August 30, 2023
Does exactly what it says it will do. Takes off burs and sharp edges off earring backs and other wire for jewelry artists.
Suz
Reviewed in Canada on June 19, 2022
Seems to work for the finer gauges of sterling silver wire that I use. I suspect that the burr cups themselves will not last too long & hope that they are replaceable. It does give a nice rounded end to wire after a few twists…there is a technique to ensure you get the edges but not difficult for a smooth finish.I wish you could purchase larger burr cups for a higher gauge of wire.Very handy for a quick job but stick to your files for more intricate work.
Monika Krause
Reviewed in Canada on May 1, 2022
This little gizmo works very well, a handy thing, works faster than putting a bit in the flexshaft,
みろまる
Reviewed in Japan on November 10, 2022
カットしたワイヤーの端が綺麗に丸くなる。コツは必要かもしれません
Oly cowgirl
Reviewed in the United States on May 30, 2018
I really was hoping this would work. Maybe I'm doing something wrong but it seems that using this to smooth down wire ends takes just as long as using a jewelers file. I was tired of inadvertently filing my fingers and fingernails when smoothing the ends of my ear wires using a regular file, so I ordered this. It does file the sharp ridges off of the wire ends but not very much and not very fast. I still ended up using my jeweler's file to finish the job. I DO like how it comes with two size cup burs and two chucks in one piece. And I like how it rotates without you having to crank your wrist around. Just wish it worked better.
Debbie
Reviewed in the United States on July 30, 2017
This is working well for me. It'll help round out 18-22 gauge wires. I find the choice in packaging rather peculiar. This tool includes 4 collets and 2 bits. If you unscrew the entire thing, you'll find one collet hiding inside the main shaft and the other is holding one of the bits. Each collet can be reversed. They're all different sizes. I'm not sure why the vendor chose to provide 4 collet sizes and only 2 bits. And while it's handy to store the second collet within the tool, there's nowhere to store the 2nd bit - which is easy to lose since they are small. I did discover that one of the collets was the right size to hold one of my tiny jewelry drill bits allowing me to create a hand drill. So that was a nice perk. But I still think it's a strange choice. I wonder if I can get additional bits?
Radek F.
Reviewed in Canada on February 6, 2016
Works just as expected, good quality.
Retro Knight Gaming
Reviewed in the United States on May 20, 2015
Wife says:I am a jeweler and work alot with wire. Bad reviewer didn't take time to get to know product. I played with it for a minute, the wooden handle easily slips off because there is an added storage space and extra pin ! :) to hold second burr cup!!! Lol Thats why the wooden handle comes off. You can store second burr cup not in use by unscrewing metal end under wooden handle and slipping the burr cup into opening of second pin in storge space, and screwing metal end on tightly then putting wooden handle back on.They might get better reviews if they print this info on backside of logo label LOL!I really didn't want to spend 30-40$ on a large burr cup set since I am building my tool collection now with just the basics. This will work with wire as large as 16 gauge and smaller, but 16 g is as large as I have on hand. Made well, feels sturdy great price.
beedyreader
Reviewed in the United States on January 26, 2014
It comes with two cup burs, and two chuck keys, one hidden inside the column. Those are what hold the stem of the cup bur, and you rotate the top collar to tighten or loosen, just like you would on a drill. The wooden handle cups in your palm comfortably so your fingers can spin the bit very easily in whichever direction you choose. And take note that it can take about 20-30 good turns to round off an end piece IF it's been flush-cut. It may take more than that if it were sharper, or at an odd angle/cut weirdly, etc. Yet the free-spinning ability this tool provides makes quick work of it, and is really effective.Be sure to use the cup bur that's the tightest/closest fit, or else it'll take longer to work. Either way, experiment with approaching that end wire from different angles to see what works best for whichever design you're working on. As with any tool, it will take practice before you're able to quickly round off wire without a hitch.
Sue Hicks
Reviewed in the United States on October 5, 2013
I saw a video on the use of this little tool to round the burr from cut wire, so I went straight to Amazon to find it. Sure enough there is was and I can't believe how I ever did without it. The time it saves me from filing the cut ends of all those wires in my jewelry! A few twist on this tool and bingo..smooth ends no more sharp points. It comes with two sizes of burrs that take care of what I use, mostly 20ga and 22ga, but not limited to those two. Very easy to use fits nicely in the palm of my hand and turns with ease while holding it in my finger tips. A must have in my basket of wires and other tools. I love the feel of the wood handle, and the turning parts are nicely textured in metal.
paxaw
Reviewed in the United States on February 9, 2012
Bur cups are smaller than I expected, but these are my first, so what do I know? Took several twists of the wire to round off the edge, but eventually made it smooth. Tool is solid and no problems so far. Would purchase this set again if I had to do it over. Good value.
Recommended Products