Your cart is empty.
Your cart is empty.Product Description
Set of 3 Radius Jig Router Templates Aluminium Alloy Radius Corners
This set of tools allows you to making trimming of the corner of the wood panel, and we called it Radius Quick-Jig or Corner Jig.
6 specifications
- Laser engraving R5 R10 R15 R20 R25 R30
- Each size of template is 80mm x 80mm x 19mm / 3.15" x 3.15" x 0.75"
- R5 = radius 5mm=0.1968
- R10 = radius 10mm= 0.3937 ≈ 3/8"
- R15 = radius 15mm=0.5906 ≈ 9/16"
- R20 = 0.7874 ≈ 3/4"
- R25 = 0.9843 ≈ 1"
- R30 = 1.1811 ≈ 1-3/16"
Widely applicable
Appliable to various of board to cut perfect outside radiuses, such as photo frame edges, table & chair edge or corner, the triming of corner or wood panel, etc.
Professional woodworking tools
Package includes 3 different radians of radius templates. which could meet your measuring requirements to make various sizes of roundness radians.
Convenient & easy to use
Just select the template corner you wanted to make, and put it onto the decided corner of wood.
- Note: please do not use it on too thin boards.
California Kid
Reviewed in the United States on October 18, 2024
I don’t own a router or want to use one. These were good for rounding my small wood projects using a belt sander, then fine tuning on using a palm sander. A little tricky to hold into place but got decent results. The casting is heavy. Besides its red paint getting sanded off they seem to be retaining their radius. A good variety of useful radiuses to choose from too.
Customer
Reviewed in the United States on May 3, 2021
Quality is great and they are so simple to use. Exactly what I needed!
Kelly B
Reviewed in the United States on August 4, 2020
Creating perfect rounded corners was always a struggle until now. Paired up with my Whiteside spiral 1/4 inch bit (bearing on the end) in my router table and perfect rounded corners was quick and easy in 7/8 inch white oak. I did four in about five minutes today. I wished I had not waited so long. These have earned a prominent place on my pegboard.Update 4/1/2024: I am still liking these. I have moved to a 1/2 inch flush spiral bit as I have found it easier to control. I have also added some thin cork dots to the template on the outside edges that sit between the wood and the template. This helps to hold the template in place and prevent slippage while allowing a little extra clearance to the bit. I have also learned to trim the waste on the miter saw (45° corner cut) before moving to the router table. You also want to orient the top of the board so that you are cutting from long grain towards the end grain to prevent chipping out; do two opposite corners, then flip the board over for the other two.
Carpin Uo
Reviewed in the United States on June 21, 2020
Strong and easy to use, if a little big at least a inch, could be better, but great tool great price fast delivery at Central Mexico thank you
E. Singletary
Reviewed in the United States on March 10, 2020
I am really enjoying the red radius so far. I've had only 2 occasions so far to use them both times on cutting boards and both times the R30.When I first saw them I was a bit apprehensive about the location of the finger hole since that is all there is to hold it by. But my fears were calmed after the first cut. Of course I am cautious anytime near the router especially a couple inches.I reccomend the tools with caution when using.They are solid metal and stoutly built. A good quality for the money.
catmorgan
Reviewed in the United States on November 6, 2019
Bought for my husband. He keeps complaining they slip when trying to use them. He has had to start a couple projects over because of this. The shapes are great and they seem tough but there should be a better way to hold them in place.
Ray F
Reviewed in the United States on October 24, 2019
Great product very accurate. Making rounded corners is a breeze now. I used to have to set up jigs on my sander, not anymore. Drop one of these on a board, run it by your router and it's a beautiful clean rounded corner.
sir eggsalot
Reviewed in the United States on April 7, 2019
I was surprised at the quality considering the cost. Anodizing is a bit soft, but it does not affect how it works. I needed to route the corners on some narrow (3.5") stock and the Rockler set I originally purchased was too wide to fit. I messed up a few boards when the jig slipped, but I think thats just the learning curve. Overall I'm super happy with them.
Recommended Products
$26.02
$ 13 .99 $13.99
$25.99
$ 11 .99 $11.99