Shopping Cart

Your cart is empty.

Your cart is empty.

Fafeicy USB 100KHz 4-Axis Motion Controller Card for CNC Engraving, Servo & Stepper Motors

4.3 (12) Write Review
Free shipping on orders over $29.99

$17.43

$ 7 .99 $7.99

In Stock

About this item

  • 【Functions】The function of this motion control card includes that it supports automatic probe tool, emergency input, limit switch, and supports for connecting electronic hand wheel
  • 【4-axis Linkage】Usb interface board supports for 4-axis linkage, you can stepper motor drives or servo drives. 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device
  • 【Wide Use】The maximum step-pulse frequency of motion control card is100KHz, which very suitable for CNC Engraving, Servo Motor, Stepper Motor Servo motor
  • 【Advantage】The motion controller needs using external 24V DC power to isolate USB and external port, and to make the system more stable. And it has 0-10V output port, you can use software to control the spindle motor speed
  • 【Drive Output Interface】The 4 general-purpose isolated relay drive output interface can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device


Product Description

MACH3 Controller
motor controller
Motion Control card

Specifications:

Size: 8 x 7.7cm/3.15 x 3.03inch

Weight: 160g

Package Included: 1 x USB CNC Controller Card, 1 x USB cable, 1 x CD

CNC Controller Card

usb CNC Controller Card

cnc breakout board

cnc motion controller
Interface board size 9*6.3*2cm/3.5*2.5*0.8in ✓
Support Axis ✓ 4
Support drive type ✓ stepper/servo driver
Weight Approx.200g/7.1oz Approx.128g/4.5oz

Giovanni Terranova
Reviewed in Italy on January 15, 2025
ottimo interfaccia per cnc . gestione dei controller dei motori , ottima
WimS66
Reviewed in the Netherlands on August 3, 2024
CD is helaas niet leesbaar ivm beschadigingen / scheur.
Andres
Reviewed in Spain on January 2, 2024
Lo uso en una CNC convertida de Proxxon y va genial.
Daan
Reviewed in Belgium on March 4, 2023
X axis signals doest work
Scott Laughlin
Reviewed in the United States on November 3, 2023
This changes everything. For years I have used an old, clunky pc for each of my machines. Now I can use my laptop with Mach3 to run my largest machine.
Customer
Reviewed in the United Kingdom on April 27, 2023
I have used these boards on two mini mills and a lathe. I'm using inputs and outputs, all work fine. No stuttering and able to tune easily with mach3. Documentation a bit weak but plenty of stuff online
wvaldo morales
Reviewed in the United States on September 16, 2022
The mach 3 disc was blank, not much info
Luis Mejia
Reviewed in the United States on July 28, 2022
De Muy Buena calidad, es la tercera que compro porque se adaptan muy bien a todas las necesidades y uso con MACH3, la recomiendo!!!
Steven J.
Reviewed in the United States on June 26, 2022
Lucky for me I bought this same controller from someone else, because that one crashed. Otherwise I wouldn’t have been able to get it to work.If you are new to CNC I would avoid this product.
Ramona Fries
Reviewed in the United States on February 25, 2022
Tried a SainSmart controller before this and couldn’t get any good supporting documents that would support a newbie (not on YouTube either) the disk and the pdf’s on it were enough for me to get it done in an hour, including software install.
ReviewDude
Reviewed in the United States on April 6, 2022
This board works well with my old windows 7 laptop. Directions were easy to follow. The hardest part was finding the driver file on CD that enables the board to connect to mach3. Considering many file folder names were in Chinese, I had to open each folder until I finally found the driver file. After locating this file it was easy to copy it into the mach3 plug in folder and then everything worked like magic. This board turned my old dusty laptop into a nice cnc computer. I'm very pleased with this purchase.I had to give this a 5 star rating. Even though it was hard to navigate the CD the price and performance is hard to beat.
Robert Allen
Reviewed in the United States on April 12, 2022
No comment