Your cart is empty.
Your cart is empty.Whether you're shooting digitally or on film, Fotodiox offers the world's largest selection of lens adapters. Mix camera/lens platforms or reinvigorate vintage glass; Fotodiox has hundreds of ways to mount lenses onto your DSLR or SLR camera. Our adapters deliver infinity focus, manual aperture control, and a sturdy build for lasting quality. This lens mount adapter allows Pentacon 6 (Kiev 66) SLR lenses to fit on the Canon EOS camera body.Compatible Canon EOS (EF, EF-S) Mount SLR Cameras - Popular models include:1d/1ds, Mark II, III, IV, X, C, 5D, 5D Mark II/III, 7D, 10D, 20D, 30D, 40D, 50D, 60D, 60DaRebel xt, xti, xs, xsi, t1i, T2i, T3, T3i, T4, 300D, 350D, 400D, 450D, 500D, 550D, 1000DPlease Note:This is a manual adapter, so lens functions that rely on electronic communication with the camera body (autofocus, AE metering, image stabilization, etc.) will be disrupted.Set your exposure manually or meter using your camera's Aperture Priority (stop-down) mode.If your lens does not have a manual aperture control ring, it will stop down to its smallest f/stop by default.All pictures are for illustration purposes only. Actual product may vary slightly due to ongoing improvements in design.
James Willis
Reviewed in the United States on September 28, 2024
Trying to do a repair on a Zeiss 180mm 2.8 and it is impossible to remove. Like others have said, it’s permanently fixed on now.
Bryan Hewitt
Reviewed in the United States on November 29, 2022
I bought this to use with an 80mm f2.8 Carl Zeiss Jena Biometar red MC. The adapter is very durable and attaches securely to the lens. After installing it, my lens reached perfect infinity focus. I have used the combination on several films now. It is great in a production environment because it does not wobble or move either where it attaches to the camera body or the connection to the lens. Using both manual and motorized follow focus units has been no trouble. The adapter is so secure sometimes I forget I am working with an adapted lens and not a native EF-mount lens.
R. Delaney
Reviewed in the United States on March 1, 2021
This is not a cheap metal tube. I bought one for Penticon 6 to Micro 4/3rds. Not cheap, well made and it works asavertized. I have 20 of these Carl Ziess lenses that work on the b4/3erds system and I ordered one for my old Canon 20D.
Gagik
Reviewed in the United States on February 14, 2021
Good product!
Antoni L
Reviewed in Canada on November 14, 2021
Happy to have it.
Customer
Reviewed in Canada on November 18, 2019
Good product, although not all lenses fit this mount.
Leonid Grossman
Reviewed in the United States on September 1, 2018
Too much expensive
Video Rockstar
Reviewed in the United States on March 19, 2015
Extremely difficult if not impossible to remove. Took me several days of extremely strong torque to remove from the first lens I tried it on.Now it's stuck on another!! No response from company regarding question/issue. I'd try another brand unless you are looking for almost permanent installation. Too bad as the product worked well with my camera. I'm not sure if this is a machining issue or what. Originally was stuck on my 50 f4 CZ Jena Flekto. Now seems permanently affixed to my 180 2.8 CZJ sonnar!!! Beware!
Nathan Thompson
Reviewed in the United States on January 5, 2015
Please beware, I made the mistake of leaving this mount on a Carl Zeiss Jena 185mm lens and it became permanently fixed to the lens. I tried every tool and every degree of power to get this thing off and it wouldn't budge. So if you go with this mount, make sure to take it off immediately after use. I like a lot of Fotodiox mounts, but this one I cannot recommend unless used with caution.
Alex Armani
Reviewed in the United States on October 25, 2012
I ordered 2 Pentagon six to canon adapters, Adapters are well done but the problem is black anodizing to shiny inside. Using this adapter with 180mm 2.8 Zeiss images having flair from side reflection. With German made original adapter I have no problems.
Recommended Products
