Your cart is empty.
Your cart is empty. Description:
【PACKAGE CONTENT】You will receive 1pc white extension nipple, 1pc silver metal retaining ring, 1pc black O-ring, 1pc black thread reducer adapter, 1pc slip fitting adapter, 1pc PTFE tape, 1pc hex wrench and 1pc rubber gasket. Does not include tub spout.
【4 IN 1 UNIVERSAL】This 4-in-1 bathtub spout adapter set provides universal size, which can be applied to 1/2inch copper pipe connection, 1/2inch male thread connection, 1/2inch male pipe connection with threaded end, and 3/4inch male thread connection.
【FOR 1/2INCH COPPER PIPE】For 1/2inch copper pipe, the length of the copper pipe from the wall should be at least 1 inch to max 2 inches. For fit 1/2inch copper pipe, should thread screw through the retaining ring into recessed hole, foucing it to break through the extension nipple. Adapter and O-ring are pre-installed for fit 1/2inch copper pipe.
【EASY TO USE】For fit for 1/2inch IPS and 3/4inch IPS, it should be disassemble the adapter and O-ring first. Wrap the threads with PTFE tape several times to avoid leaks. You can successfully install the tub spout.
【DURABLE MATERIAL】The bathtub spout adapter accessories set is mainly made of plastic and metal materials, which is safe and harmless, healthy, solid structure, durable and wear-resistant, and can be used for a long time.
Specification:
Material: Plastic+Metal
Color: As shown
Extension nipple length: About 100mm/3.94
Size(ID x OD):
Retaining ring: About 3.05x3.56cm/1.2x1.4inch
Thread reducer adapter: About 1.8x2.49cm/0.71x0.98inch
Slip fitting adapter: About 2.03x2.54cm/0.8x1inch
O-ring: About 1.52x2.03cm/0.6x0.8inch
Package includes:
1pc x Extension nipple
1pc x Retaining ring
1pc x O-ring
1pc x Thread reducer adapter
1pc x Slip fitting adapter
1pc x PTFE Tape
1pc x Hex wrench
1pc x Rubber gasket
David Wells
Reviewed in the United States on March 11, 2025
adapter ring split goin on a 3/8 pipe, still cant shower. dont go cheap i guess.
Cody Nicholas
Reviewed in the United States on February 24, 2025
I was redecorating my bathroom and ordered all new fixtures to install. When I went to take the old spout off, I could see that there wasn’t a set screw, so I assumed it must be the screw on variety. No matter how hard I twisted, it was stuck and made no progress at all. I eventually just cut off the body of the old spout to see why it wouldn’t turn and realized that’s because it was soldered on. I have never seen that before.So I had to cut off below the soldered part and was left with a nub. I used the adapter piece to elongate the pipe so that I could install my new tub spout. It looks great and allows the spout to sit flush and tight against the wall.
Recommended Products
