Your cart is empty.
Your cart is empty.Product Description
Unintentional and Accidental Shootings Happening Every Day
Gun accidents are more common than anyone would like to think. There are 467,000 YouTube videos of people accidentally shooting themselves with pistols or guns that graphically shows this fact. A good-sized number of these victims would probably wish they used the Micro Trigger Stop if they knew about it. Most semi-autos and all revolvers do not have built-in Switch On/Off Safeties. You owe it to yourself and others around you to take every precaution for self-defense to help ensure that the gun will not discharge accidentally by you, a child or anyone else.
Better To Be Safe Than Sorry
Even if you have a built-in safety, wouldn't it be smart to have a second line of defense for accidental discharge especially when carrying chambered? This patented product is an uncomplicated design that can help make conceal carry a little safer. The tension adjusting Micro Trigger Stop is designed to be wedged between the back of the trigger and the back of the trigger guard. It is made of a moderately flexible rubber material that has enough flexibility to be pushed out of position with one finger and you are fully functional. If your habit is to carry a gun either un-chambered or chambered for quick response time, the Micro Trigger Stop can be pushed out in less time that it takes to remove the gun from a pocket, holster or purse.
You Are Truly The Only Safety
The Micro Trigger Stop Holster does not function as an absolute safety. It is only as effective as the user is responsible. This is not in any way considered child safe or humanly infallible. The Buyer must evaluate his or her habits and the way he or she intends to carry and access the gun. I use it and find it to be highly effective in allowing me to feel more
comfortable with a chambered gun.
How To Operate The Adjustable Micro Trigger Stop
How To Use the Patented Micro Trigger Stop: Please make sure the gun is unloaded whenever you are going through this procedure, First, if you place the flat surface behind the trigger when inserting it into the back of the trigger guard, this position of the trigger stop would be the smallest adjustment. If after putting the micro trigger stop in this position, you can still actuate the trigger, place the rounded surface behind the trigger. This would be approximately a 3mm adjustment. If you can still actuate the trigger, you have the wrong trigger stop for your firearm. Please watch the video included in this listing for further instructions.
Brian Wilkinson
Reviewed in the United States on September 2, 2024
A really good quality product and definitely worth the money!
Stephen L
Reviewed in the United States on December 27, 2017
Really good!! Easy to poke out when needed and I tried pulling trigger back to fire it with it in and you can’t! I did it at the range loaded ready to fire and could not do it! I’m pretty strong too! I will carry my ruger lcp 380 loaded ready to fire when I’m carrying it in my pocket! I practice lots of time pushing it out with trigger finger in my pocket and pushing it out as I’m drawing it out. Do not listen to any negative reviews!! It is quicker to push it out and fire than it is to pull your gun out and pull slide back to load the gun then then fire! Get it!!! I have had this product for about 3 months now and still love!! Always carry hot now with confidence!
Shirl
Reviewed in the United States on February 1, 2016
Wee now have guns in our house. While there are no children in our household it is top priority to me to take all the safety precautions I can. When I saw these little gems I had to try them.I am unable to use these on my gun because the trigger is solid all the way into the frame of the gun. Luckily my gun has a good safety. But this product works great in my husband's gun. He doesn't have a true safety on his gun so this device is a true blessing.These are made from a sturdy rubber. They easily slide behind the trigger. When you want to shoot your gun you just quickly pop it out with your trigger finger. To build up speed you just practice with an empty gun. If you can get to the point where you pop it out as you are pulling the gun from your holster then it won't slow you down if ever you have to defend yourself. You won't be able to use these if you have anything behind the trigger such as laser. You also want to be sure to buy the proper size for your gun.I recommend these to every gun owner.
Bree
Reviewed in the United States on September 13, 2015
Bought these for my gun because I carry it with just a clip and no holster. I wanted something that would give me some piece of mind, just in case. These work perfect other than they can be hard to push out if your a weakling like me. I simply cut around the edges with scissor's and then smoothed it out with a dremel tool. Works great! Slips out easier now but still gives me that peace of mind I wanted. Company is great also. Shipping was very fast.
james calles
Reviewed in the United States on May 14, 2015
excellent purveyor 5 star bad product no stars if you use this product in conjunction with the Ruger LCP 380 and you carry it for self defense you will become the victim it will never be pushed out in a emergency situation might be good for child safety
Owner
Reviewed in the United States on October 6, 2015
I'm a bit torn on how to rate this product. It does exactly as it says and is a good addition to make yourself feel safer against accidental discharges on a firearm that has no safety. I have tried my hardest to pull the trigger far enough for the hammer to drop and it just won't happen when this is installed. For doing as it says it does, I'll give it 3 stars, but with complaints on the idea of using one these.In any life or death scenario, seconds if not less will determine if you live or die. This trigger stop fits very tightly (with or without crimson trace addition) and can require quite a bit of pressure to release. If one handed, this pressure is more than enough to push the gun right out of your palm when using your index finger to push. Even after squeezing and twisting to break it in, it still doesn't push out fluidly. In the real world, the time you spend fumbling around trying to push this thing off could literally cost you your life.The LCP 380 is designed to be drawn and shot. Adding a push to the trigger stop creates a variable which can throw this motion off. No matter how much I loosen the rubber, draw + push + fire takes much more time than draw + fire. Problem is, the stop can't be much looser or you risk accidental push out during holstering/pocketing and the thing is rendered useless.This product creates a false sense of security in my opinion. If you don't feel comfortable carrying a gun without a safety, then the LCP 380 is not for you. Products like this don't take the place of a mechanical safety which could be deactivated more fluidly during a draw.I don't feel safe using this product and will not use it for carrying. Your life could depend on this little piece of rubber. Is it worth it to you?
Dave Steele
Reviewed in the United States on April 26, 2014
I bought one of these for the Taurus TCP and liked it so much that I showed it to my father and brother who both own Ruger LCPs. It worked great for those, too so I got a couple for them. My father showed his to a couple of friends and they liked it so much that they wanted one for their LCPs and I ordered a couple more for them. For a normal Ruger LCP or Taurus TCP, they work great and I can pop one out while I'm bringing the pistol up to firing position and there is really no delay. And it gives me the feeling of security of knowing that I won't accidentally pull the trigger while pulling it out of my front pocket holster, where I keep it.NOTE: My father's LCP does have the Crimson Trace Laser installed that covers part of the trigger guard. The description says that the trigger stay isn't for guns with a laser mounted on the trigger guard. It will still work, but not as good. Meaning, that it is harder to push in and push out but it still can be used. I've practiced pushing it in and out of the LCP with the Crimson Trace and it's a little more work in getting it in. I can push it out with one finger but have to push hard. Or I can push with my right finger while holding the gun with my right hand and grab the other side and pull with my left hand. It takes probably an additional half second or second to do that but if you are that concerned about preventing accidental trigger pulls, this can still work. It just won't be as convenient as one without the trigger guard mounted laser.
Recommended Products
$199.99
$ 88 .99 $88.99