Your cart is empty.
Your cart is empty.GENUINE KOHLER PART KIT, REPAIR CARBURETOR
Adam H.
Reviewed in the United States on August 21, 2024
Come with everything and fit what it says it fit
john c w
Reviewed in the United States on May 31, 2024
As described
Frances G. Stappleton
Reviewed in Canada on July 2, 2020
It was the wrong kit
Ron Holland
Reviewed in the United States on July 6, 2018
Good kit. Good quality. Bowl gasket was what I specifically needed but it included the needle valve and gaskets so I replaced those also for about the same price as bowl gasket alone from other sources
Olive
Reviewed in France on May 19, 2018
Bien! Véritables Pièces D'ORIGINE KOHLER pointeaux de carburateur fidèle à ma Yard Man AF6150très satisfait mais le kit est un peu cher pour ce que c'est !Et il manque une notice.
CVABuck
Reviewed in the United States on January 17, 2018
The media could not be loaded.
dfreeman
Reviewed in the United States on July 11, 2017
Worked great on Koehler CV460S, was quoted $159 from local small engine repair. Watch YouTube to repair took 45 minutes, screw driver for fuel line, 10MM & 8MM Socket to remove carb and intake, 10MM open end to remove deadman selanoid, one can of carb cleaner, 2 Qrts 10W-30If you were blowing blue smoke, oil out exhaust, or if engine was stalling when downhill, you need to drain oil, replace oil filter and top off with 64oz 10W-30 non-synthetic.If blowing blue smoke previously exhaust will smoke for 10-15 minutes until all residual oil in exhaust is burned off.
A Chandler
Reviewed in the United States on October 30, 2017
All the OEM parts necessary for a simple rebuild except the float. Comes with two different needle valves so you can match the type of needle needed for the Kohler carburetor you have. If you're doing the rebuild on a carb with a lot of hours on it, go ahead and order the float. It will save the time and trouble of having to tear it down again and trying to save the gaskets or buying another set.
YE
Reviewed in the United States on August 15, 2016
I needed to replace the float valve needle on a Kohler CV492S in a Craftsman tractor as the rubber tip deteriorated and was leaking gas. One of the needles in the kit is the same shape as the stock one but not rubber tipped. The carb has a brass seat so can't use the included rubber seats in the kit. They must be for another model. I couldn't find any kit that has a rubber tipped needle. The brass seat was in good condition and the needle did seal really well against it. No more leaks. All parts are as pictured although it's a really bad picture.
STL
Reviewed in the United States on May 18, 2015
I had gasoline coming out of the exhaust on my riding mower after sitting for awhile. Ordered this and install was a breeze. Mower started right up and has been running great after installing. When replacing the jet pin just make sure you put the same size back in. There are two different ones it comes with but it is very clear which goes back in after seeing the old you have taken out.
Recommended Products
