Your cart is empty.
Your cart is empty. The black Haoge LH-X49B 2in1 accessory set consists of a lens hood and adapter ring. It is specially designed for the lens of the FUJIFILM X70 / X100 / X100S / X100T / X100F camera.
The adapter ring facilitates the attachment of the lens hood or a 49MM thread filter to the lens. The product set helps to minimize lens flare by deflecting stray light from entering lens. And since the end of the lens is extended, it also provides additional protection to the camera and lens from accidental impact, bumps, and scratching. The hood features a non-glare matte finish on the interior surface to further prevent or limit lens flare. No vignetting will caused by attaching a filter or the hood. In addition, the original FUJIFILM lens cap can be mount onto the lens hood, so you can use the original lens cap without removing the hood.
Features:
Designed for Fujifilm Fuji X70 / X100 / X100S / X100T / X100F.
It comes with 2 item accessory set: Lens hood+Adaptor ring.
Designed to minimize lens flare by deflecting stray light from entering lens.
The adapter ring facilitates the attachment of the lens hood or a 49MM thread filter to the lens.
Provide additional protection to the camera and lens from accident scratching.
Anodized alumium made metal lens hood.
Original FUJIFILM lens cap can be mount onto the lens hood .
Compatible with:
FUJIFILM X70 / X100 / X100S / X100T / X100F
Package Included:
1 x Black Lens Hood with Adapter Ring for FUJIFILM X70 / X100 / X100S / X100T / X100F
(Note: To use the lens hood, the user has to remove the ring on the top of the lens of Fujifilm X70 / X100 / X100S / X100T / X100F)
佐藤啓三
Reviewed in Japan on February 28, 2025
コンパクトで、愛用のポシェットに何とか収まった。純正のキャブが装着出来るのが良い。シルバーボディにブラックのフードを購入したが、精悍な感じになった。
Corey Riddell
Reviewed in the United States on May 20, 2024
I like having a lens hood to protect the lens and the UV filter that keeps my x100v weather sealed. Probably the least expensive filter adapter for the x100v. Using this now instead of the rectangular hood I was using previously, this adds less depth and if I need to pull the hood off to stack a circular polarizing filter on, there is no pesky o-ring to lose. It's a little more stealthy than the rectangular one as well, get less looks from camera guys out shooting on the street.
Thanh T.
Reviewed in the United States on October 6, 2024
You can see the pictures that I uploaded one before and one after attaching the 49mm Black Pro Mist filter in the middle. You can clearly see the gap. It’s fine to me but it might be a deal breaker to you. Otherwise, it’s the most compact and lightweight.
K. Bennett
Reviewed in the United States on April 3, 2024
Got this for my new X100vi. I had one of the longer square hoods for my X100t, and wanted something more compact. This hood fits the bill. It's also quite protective and I carry the lens w/o the lens cap.
SpudX
Reviewed in the United States on December 13, 2023
I bought this to use with my Fujifilm X100V and it is perfect! Excellent quality and looks, while protecting the lens from bumps. An added bonus is that the OEM lens hood fits perfectly! Just know that if you have a Fujifilm version other than the X100V the OEM cap will not fit. My solution (when I owned the X100F) was to simply buy an X100V lens hood. While JJC released a similar hood, this one is more compact, which I prefer. Highly recommended!
John R.
Reviewed in the United States on December 23, 2022
I was a bit skeptical about this product after reading reviews about trouble with the threads. Dunno if I got lucky or what, but mine screwed in easily on the first try and fits great.But what really pleases me is the fact that I can put a full size filter (in my case, a Cinebloom 5%) between the adapter and the hood, WITHOUT ADDING ANY MORE BULK! The hood actually covers the outer edge of the filter entirely and hides it within. I think the bright red ring of the Moment filters are kind of silly looking so this was a doubly awesome surprise.I'm very happy to have a low profile hood, my camera properly weather sealed, and the lens protected— all in a compact but affordable package. Double bonus for accommodating a full thickness filter and managing to hide it as well. All this without mentioning... the original lens hood fit snugly on top. Ingenious design!The color match to the black is not 100% but as you can see from my image, it definitely looks right. You'd have to be a real stickler to take issue with it.
Michael Spyratos
Reviewed in Canada on July 17, 2021
Good addition for my Fujifilm x100v. Discreet hood that doesn’t protrude. It’s good quality and protects both against sunlight but also from touching the front elements of the camera. Plus it looks good.Many people ask if you can use this with a filter. For the x100v the product description says that you cannot, but it’s not entirely true. I combined it with a slim UV filter and it was a perfect fit. I’m not sure if it would work with a thick filter though.Some people had issues with the original Fujifilm cap not fitting tight. I tried it and it has a very good suction. It doesn't just fall of. Of course if you push it or rub it against something it will eventually come off, but I would be very confident having the cap on. To be honest I don't see the reason though. If you combine this with a UV filter you are good to go.
Azon
Reviewed in Canada on November 27, 2020
I bought a JJC one first, but right after installation find out that it's too much protrudes from my camera... There are too much space inside looks like for 2 filters. Didn't tried, just sent it back. I want the hood to be as short as possible but protect my lens.I ordered this one and it's fit just perfect. Designed for flat line filter but also support a standard BW if you are not annoyed by the fact that the hood is not screwed to the end by the thickness of a hairline. Nothing critical.The best option for me. I'm not using lens cap, just this adapter with hood on it and UV inside.
GG
Reviewed in the United States on September 7, 2018
I’m using this in combination with a B+W filter from the XS-Pro line, which are thin enough to fit inside the adapter/hood combination. This is about as small a hood as you can get that still works with a filter. JJC produces a hood that looks similar, but is definitely a bit deeper. The quality is about the same, I can’t tell a difference. The original Fuji lens cap can be used to cover the lens, and the fit is snug.The hood does intrude a little into the OVF corner, but not massively, I don’t experience it as a problem.I have not seen any vignetting, but the hood’s shadow does show up on the bottom edge of flash images, this may not be an issue if you use the flash for fill in bright light as the shadow is narrow. I believe any hood will do this on the X100F. Removing the hood but leaving the filter and adapter in place gets rid of the shadow.
W. Schaffel
Reviewed in the United States on June 17, 2018
I rarely ever use a hood on my lenses, however, to use filters on the Fuji X100 series cameras, you need an adapter that screws onto the 23mm f2.0 lens and then provides the female threads to use 49mm filters. All of the third party adapters for the Fuji X100 series come as part of a hood/adapter kit. The adapter also acts as a bayonet mount for the hood and a spacer between the lens and filter glass to prevent the lens from hitting the filter glass when the lens moves out to focus in macro mode. Most of the X100 hood designs are cone shaped and flair out, adding unnecessary bulk, and partially blocking the view when using the viewfinder in the optical mode (OVF). This hood slants in, looking more like a lens cap with a large hole in the middle, and it provides more protection then most hoods do. Plus, the build quality, fit, and finish are excellent and match the finish on my Fuji X100F. The hood is designed so I can keep a UV protection filter on the front of the lens with the hood mounted and still use the original Fuji metal slip-on lens cap that comes with the X100F. Most hoods are too wide on the end to use the original lens cap and require other solutions like a 49mm snap cap. The only complaint I have is that you have to use a UV protection filter with a thin ring or the hood will not screw onto the adapter all the way and then prevent the use of the original lens cap. Because it works with both a UV filter for protection and the original X100F lens cap and provides extra protection for the front of the lens, I just keep the hood on the X100F all the time unless I use my CPL or an external ND filter.
Mateo
Reviewed in Spain on May 11, 2018
Sólido. Encaja a la perfección en mi Fujifilm x100f. Lo compré porque necesitaba el anillo adaptador para poder poner un filtro UV. El parasol da cierta sensación de protección, y la tapa del objetivo se adapta perfectamente.
Jeffrey Levinton
Reviewed in the United States on February 28, 2018
This device mates beautifully with the Fujifilm x100f once you remove the outer ring (unscrews) and allows fitting of the X2 UV Filter (49mm) for protection and uv filtering. Kudos to Breakthrough Photography for expediting the sale quickly and efficiently. I got the black one but have a black and silver 100f and wish I got a different color. Otherwise looks very nice and makes the camera more portable than the admittedly cooler Vello flare device I already had. It is slightly thicker but that is no big deal. It is an advantage that you can slip the original Fujifilm lens cap over the Haoge.
PG-foto
Reviewed in Germany on May 4, 2017
Ich nutze es an der Fuji X100F in Schwarz. Das Produkt passt 100%+ keine Vignitierung bei Unendlicheinstellung+ Filter weiterhin Nutzbar+ Original Deckel weiterhin passt 100% Nutzbar da Fokusring und Gegenlichtblende den gleichen Durchmesser haben.+ unauffälliger geht es nicht.+ Kamera wird dadurch griffiger+ passt für mich in meine ultras lim Hülle aus Neopren von Op - Tech - USA immer noch herein.+ Beim optischen Sucher ist sie durch die Spezielle Bauform weniger im Weg. Viel besser als die Originale. Man kann sie also immer drauf lassen.+ Robust und gut verarbeitet.o Schwarz ist ist etwas matter als die Originalfarbe der Kamera das wäre die Originale Gegenlichblende aber sicherlich auch.Klare Kaufempfehlung!!!
Recommended Products
