Your cart is empty.
Your cart is empty.High performance transmission coolers are a round tube serpentine design featuring threaded fittings for added reliability. Kits contain cooler, hose and mounting hardware.
Danny boy
Reviewed in the United States on January 5, 2023
Good product
K Boyer
Reviewed in the United States on November 18, 2022
Note, I'm an engineer who has worked for a heat exchanger manufacturer. This is an aluminum cooler like many others and most of the construction is fairly typical. It is comprised of straight tubes and u-tubes that are uniformly heated in a large conveyer oven where an outer layer of aluminum cladding material melts before the base aluminum to create a seal at the joint. This is all fine.What isn't fine is pressing on a fitting over the inlet and outlet of the tube without any type of braze or seal. Note the gap that opened up on the ends of the tubes near the fittings indicated by the clean break in black coating. This isn't a 'flare' on the end of the main tube that was added after baking, it's merely pressed on. Enough vibration from any road-going vehicle is going to separate this connection.
Trung N.
Reviewed in the United States on June 18, 2021
The 4Runner with over 300k miles then never overheated before even when towing a camper. This past trip I was overlanding and it happened two times where I had to stop and run the heaters and wait for it to cool down. It was while off-roading in Death Valley National Park and through Imogene Pass in Colorado. The cooler seems great quality and was easy to install. The fins are soft so be careful when mounting and you can always bend the fins back to shape if anything. Oh, I also bought the Hayden Automotive 106 Transmission Oil Cooler Hose to route/install everything.I know the V8 4Runners with the towing package come with a transmission cooler from factory, so I am sure it's a great and cheap add-on for anyone off-roading or towing with their 4Runner!
Wheelieking51
Reviewed in the United States on April 1, 2021
Great little cooler easy to install comes with everything you need works great
Gage
Reviewed in the United States on December 16, 2020
Installed 12/16/2020 - First off, install was relatively easy. Took about an hour all together. The fittings that came with it worked fine, I needed some extra hose but luckily I had some laying around. I used my factory cooler location to mount this one so it looks like it’s meant to be there. I can’t speak of how well it’s keeping the transmission cool yet since it’s winter but I will update my review once the weather heats back up this next summer. My reason for installing is because I purchased a used 2005 Silverado 1500 that had a cooler but it leaked.
man
Reviewed in the United States on August 25, 2019
The size is ok. Easy to install for any vehicle. I install on my Volkswagen Passat B6 2.0 TFSIJust added 2 couplings from Home Depot and connect it to return and feed transmission pipes. Works good!
John D
Reviewed in the United States on February 27, 2015
Cooler works ... as designed ....
Timothy D. Schuy
Reviewed in the United States on July 12, 2014
Good quality tranny cooler with good quality components. I installed in my 2000 Durango with ease but had to add additional hose to complete my installation with an external oil filter for the tranny fluid. A combination of this cooler, AmsOil synthetic tranny fluid and a Royal Purple filter dropped my temps 30 degrees according to my tranny temperature gauge. Yes the truck does come with a built in cooler incorporated with radiator. But adding more surface area for cooling the oil definitely helps and actually has the engine running cooler too.
Recommended Products
