Your cart is empty.
Your cart is empty.Product Description
Joyce
Reviewed in the United States on March 5, 2025
This heat gun works very well! Fast and easy to use.
Chiacomshort
Reviewed in the United States on March 17, 2025
I got this heat gun because I saw our water dispenser guy close our water tanks with a plastic label thing around the cap of the tank to seal it and keep it from knocking the cap off of the tank. And many times while transporting the water tank or pushing it into our water dispenser it had come undone. This works great and it can be used for many other things like resin crafts, even self adhesive lamination, you name it. It works well it’s easy to handle and you can set the heath level depending on what you want to use it for. Like it so much!
Kristi F
Reviewed in the United States on January 4, 2025
I ordered this heat gun to expand upon my crafting abilities and it is exactly what I needed. I prefer a digital interface and this was the most affordable option that I could get quickly. It has not disappointed. It takes about 20-30 seconds to get fully up to temperature and requires 10 seconds to cool before turning off. Just things to be aware of.
Flyboy Dan
Reviewed in the United States on December 12, 2024
Model reviewed: QR610AAt first, I thought this was a toy. I was wrong, but it took a bit for me to get over my initial impression. The device is mostly plastic, as are the switches and controls. I tried it out and validated it with a laser thermometer, and it’s the real deal. Because it is lightweight, it is not a problem to hold it for a while. So here is how it really works:On the back of the handle is a slide switch, labeled I, II, Off.In switch position I, it will heat up to 200º C (392º F).In switch position II, it will heat up to 600º C (1,112º F).If you put it in the Off position, the tool will continue to run for 10 seconds to cool down, and the temperature indicator (see second photo) will switch to a countdown indicator. Also in this photo, you can see the temperature setting at 356º F. I’m pretty sure the device began in Centigrade mode and all my poking around somehow changed it to Fahrenheit, but have no idea how I did it (but I like it).I installed the tip that had five diameters, then set the slide switch to 2 and adjusted the temperature to 752º F using the button on the right side of the screen. (Then temperature changes in jumps, not smoothly). I pointed it at a piece of wood while tracking the temperature of the wood with the laser thermometer. Eventually, the wood started turning dark, and finally blackened at a pretty good rate. I confirmed the temperature exceeded 700º F.My theory is that the slide switch sets the range of temps, while the plus and minus buttons on each side of the display are for picking the temp you want in that range. The device turns on the heating elements until the airflow reaches the set temperature, and then cycles to maintain it.When I was done, I had a device that had a tip at 700º F and I did not want to put it anywhere near anything combustible, but I found it sits very nicely with the tip up, which is where I left it until it had cooled down.The first photo shows everything that comes with the tool. The shrink wrap addition is quite nice. I wish there was something to organize the tips. Note that the tool is rated at 2000W, which exceeds the capacity of a 15 amp 120 volt circuit.
vanbfree
Reviewed in the United States on December 11, 2024
Heat Gun with LCD Digital Display, 2000W 140°F~1112℉(60°C~600°C) Fast Heat GunMultiple Accessories: You will receive 1 pcs heat gun with LCD digital display, 4 pcs different nozzle, 50 pcs solder seal wire connectors(18 pcs red, 15 pcs blue, 12 pcs white, 5 pcs yellow), 100 pcs heat shrink tubing and 1 pcs instruction manual. With one purchase, you can meet your various wiring needs and DIY projects.2 Modes & Variable Temp Control: This 2000W low noise heat gun has 2 modes and variable temp control button. The temperature of the Mods-I is 140°F~752°F(60°C~400°C), and the air flow is 8.8CFM (250L/min). The temperature of the Mode-II is 140°F~1112°F(60°C~600°C), and the air flow is 17.7CFM (500L/min). The temperature of the heat gun can be displayed in real time on the LCD display. You can control the temperature through the button to achieve precise operation.Safe & Easy: This heat gun is very easy to use. It can reach the temperature you need within seconds. The 5.9ft power cord allows you to have enough activity area without frequently moving the socket. The heat gun is UL certified and tested for fire-resistant materials, equipped overheating protection function, which will automatically cut off the current when the temperature is too high, providing safety protection for your work and preventing accidental burns.Ergonomic Design: This heat gun for crafting weighs only 0.7kg. The non-slip handle adopts ergonomically designed to provide you with a comfortable grip, so you won't feel tired even after long-term use. At the same time, this heat gun is also equipped with a built-in stand. When you need to operate with both hands, you can place it vertically on the workbench to help you complete your work better.Wide Application: This heat gun is very suitable for crafting shrink tubes, candles, glass cups, solder wire, strip paint, heating PVC, shrink packaging, repairing electronic equipment and embossing in daily life. Whether you are a novice, a DIY enthusiast or a professional worker, you can quickly get started with this heat gun by reading the instructions. In addition, you can also give it to your dad or male friends as a Christmas, Thanksgiving, Father's Day or birthday gift.
Recommended Products