Your cart is empty.
Your cart is empty.Product Description
This Listing Is For One New Heng's Industries Vortex II Fan Replacement Kit
Product Details:
- Upgrade Your Old Inefficient Powered Vent Easily Without Replacing The Entire Vent or Compromising the Rooftop Seal. Just Replace Your Existing Screen with the Vortex I Fan Replacement Kit to Feel the Air Flow Improvement.
- Replacement is Very Simple - All You Need is a Phillips Screwdriver (Not Included).
- This is a Cheap & Effective Alternative Option to Buying a Whole New Vent
- The Vortex Vent Kit is Designed for Use with Heng's, Ventline, Jensen, & Elixir Powered Vents.
- Non-Powered Vents Can Be Converted With Some Additional Wiring.
Heng's Industries & Bastion Distribution: Your top choice for RV parts and accessories!
At Bastion Distribution and Heng Industries, we’ve crafted the perfect partnership to elevate your experience. With Bastion’s top-tier distribution and Heng’s innovative products, you get unmatched quality and efficiency. Together, we ensure that every customer receives exceptional service and cutting-edge solutions. Explore how our collaboration brings you the best in products and support!
H.C.
Reviewed in the United States on February 3, 2025
Night and day difference from the cheap factory fan. Wasn't too hard to install. Reversible direction is great for boondocking, sucks cool air in at night and sucks out hot air when we're setting up at the campsite or cooking. Would buy again.
Steve Roberts
Reviewed in the United States on February 22, 2025
If you have one of those loud-whine ineffective things, just buy this. Life is so much better now.I have a 48-foot Delta that is a mobile lab, and like most vendors, they used the cheapest possible components. I really needed to establish an airflow pattern to sweep out VOC and elevated CO2, and was going down the rabbit-hole of added ventilators until I found this.Installation was not painful, other than the nuisance of working overhead and dressing the wires. Mine had a nice LED ring for room light, and this worked fine with that. The pass-through fitting for the hatch-opening mechanism behaved perfectly, and I gave it the smoke test.OMG. Not only is it quiet at low speeds, but if you open another vent in the rig there is dramatic airflow. I could use my Home Assistant air quality monitors to see the VOC level drop in minutes, and when it is stuffy from people it sweetens the air. And if you really want to push some volume, it will totally do it. The difference when opening an intake is dramatic, unlike the original one that does almost nothing.This is an excellent solution, and not requiring surgery aloft is a HUGE plus. Highly recommended.
Frans Andrea
Reviewed in the United States on January 26, 2025
Great easy to install
andrew rille
Reviewed in Canada on September 21, 2024
This fan was easy to install and works great
Naples Guy
Reviewed in the United States on August 3, 2024
Our RV had the oem vent fan in the bathroom that was useless. I was able to install this in about an hour. Performs well and looks great. Little bit louder than original fan, but it moves a lot more air.
Camper
Reviewed in the United States on July 31, 2024
I got two of these for my camper. One to go in the bathroom to replace the small fan and one to put over the bed. They were easy to install and fit well into the existing openings. They work well to move the air in the camper. I put one on intake and the other on outtake to move the air when it's cool enough that I don't need to use my air conditioner.
John Bartels
Reviewed in the United States on July 19, 2024
The first Vortex II I purchased made a clicking sound that got fairly loud. It was not quiet at all like other reviewers had said. So I returned it and took my chances and ordered a second one. The second one works very nicely and I hope and pray that it lasts a long time. I gave the one star review not because of the unit that didn't work properly but because classAcustoms charged me a restocking fee of $47.95 for a defective unit. Thankfully Amazon made it right and refunded me the money to my account. Thank you Amazon!I ordered another item from this same company (classAcustoms) that also didn't work . They charged me a restocking fee for that item too. Beware of classAcustoms. Once again, Amazon made it right for which I am very thankful.
Fred Ferrara
Reviewed in the United States on June 26, 2024
Easy install and works great. Installed two, one will exhaust for bath room. The other to pull in fresh air to complete a nice airflow. Not to loud, it become white noise after awhile. Tv or stereo on and won’t even notice it.
Mike Di Giovanni
Reviewed in Canada on May 25, 2024
I like that it’s a good replacement for a non powered fan vent.
ken trumble
Reviewed in Canada on October 14, 2024
Excellent
Don McD
Reviewed in Canada on July 26, 2023
I purchased this fan to add a fan in the bedroom area of our RV. It was easier to install than I expected. The fan does make some sound when it’s on, but that is to be expected. It also looks good…
Tekyfreak
Reviewed in Canada on November 10, 2023
Easy to install, great air flow, just a bit noisy but I love it compared to the small dinky fan that the travel trailer came with.
Bradford W Desatnik
Reviewed in the United States on July 19, 2017
This is a great alternative to the more costly and installation intensive fantastic fan. I will say the construction is a little cheap, the fan is loud, and not greatly balanced. But, for the price, it works very well. One of the brackets that holds the fan was broken on mine, so i used JB Weld to fix that . . . it wasn't worth returning for another one.One installation tip I can provide. Many commented that installation was difficult and needed an extra set of hands. Here is the easy way around this:1) Remove the white cap on the end of the fan shaft2) Using the wrench supplied with the fan, loosen the allen screw and remove the fan from the motor3) Now you can install the fan mechanism into the ceiling, with the wires sticking through where the fan would normally be and mount the fan mechanism.4) Make your electrical connections and tuck the wiring out of the way5) Reinstall the fan blade (make sure the flat spot on the shaft lines up with the allen screw), tighten the screw, and reinstall the cap.That makes installation easily a 1 person job.Additionally, I had to remove the "gear box" for the crank and move it to the outter set of holes in order to line up with the crank mechanism for the outside cover. This is pretty straight forward, but is not discussed in the directions.This is a great product for the price and the niche . . . we will likely be replacing this in a few years for a fantastic fan . . . but then again, we may not.
Recommended Products