Your cart is empty.
Your cart is empty.This purpose-built performance regulator utilizes the Series 1000 high flow fixed flow brass regulator with a robust quick connect primarily designed for filling large offroad tires. Compare this non-freezing regulator output of 40CFM at 150PSI to a typical compressor rated at 4-5CFM with a maximum pressure of 150PSI. PREECE PRECISION will get you back on the trail without electricity - airing up tires, re-seating a bead, or running an impact. Specifications: Designed for Carbon Dioxide (Co2) High flow capacity 40CFM (cubic feet per minute) Non-freezing under normal conditions Fixed Flow Static 150PSI CGA320 Tank Connection Soft seal washer included Brass body Brass tank connection Heavy duty universal brass quick connect 1/4" port, brass plugged accessory 1/8" high pressure port. WARNING: All accessories connected to the quick connect outlet MUST be designed for 150PSI WORKING PRESSURE. FAILURE to use correct components can result in product failure and personal injury. Gas expands with increased temperature. Bleed all residual gas from lines after use to avoid damage and hose failure.
JE
Reviewed in the United States on February 21, 2025
Attach this to a 5 lb C02 tank and inflate tires faster than a thing that’s pretty fast. I got this for using compressed gas to reinflate tires after offroading. Beats the socks off even the beefy air pumps. I love it.
Joey
Reviewed in the United States on February 28, 2022
I used this product for a little bit now and found it to be quite useful compared to using a air pump or free gas station air up stations. If your filling more than 1 or 2 sets of tires you may want to put the cylinder and valve somewhere where I can get heat as your basically using a form of refrigeration to add air to your tires. (Again that’s just a part of using Co2 over a compressor). The fitting on the END that’s included with it needs more documentation on where to get fittings for it but I ended up going to the local Home Depot to go get I/m replacement fittings to replace the included one.So far I have aired up 6 sets of tires using this valve and I would give it 5 stars if there was a bit better documents on the specific high flow fitting it used.
stacy
Reviewed in the United States on February 1, 2022
I recently purchased a small 5 pound CO2 tank with the plan to use it for my air tools where a compressor would be too large to drag around. This fitting converts the standard CO2 CGA320 valve to a 1/4" NPT fitting compatible to my air hose. It is very rugged and has a 6 point ball socket fitting.
DunerJim
Reviewed in the United States on June 5, 2021
I have several of these in service with 5 to 20 lb CO2 bottles to have a portable source to inflate tires or run air tools. They are MUCH more resistant to freezing than typical diaphragm regulators.
Howdy
Reviewed in the United States on June 23, 2021
Added this to my off-road spares kit just in case my regulator with gauges ever had any issues. Tested it out last off-road trip and it aired up 12 tires back-to-back (4 x 33", 4 x 35" and 4 x 37") with my 10lb CO2 tank with ZERO issues. It got a little frosty on the outside, but never lost flow nor speed/volume. A cheap and effective alternative to far more expensive models that can serve as a primary or backup(150 psi only) regulator for your CO2 kit.
Dan
Reviewed in the United States on March 24, 2021
So I got my "generic Power tank" purposely set up to be basic. While I do like the "Real" Power Tanks and the individual components I've seen married up to them, I wanted a no frills approach to this great idea. 1st off, I wanted a C02 bottle that could be easily exchanged at the local Norco store, similar to how you swap out a BBQ propane tank. If I would have bought a Power Tank brand C02 bottle, I would have had to drop it off on a certain day to be filled at a remote location, then return on a different day to retrieve it. No thanks, now I pop in, & swap it out in a matter of minutes. Now the "Regulator" that this review concerns. Yes there are fancier ones, but I don't care about gauges and adjustments. I would just end up breaking the fragile dials and glass/plastic viewing windows over time. This Regulator is set to 150 from the factory, DONE! Turn the only valve on, the bottle valve and fill your tire(s). I also purchased a 6' air hose, and an analog tire pressure fill gauge that connects to the 6' hose that connects to this regulator. Analog means I don't have to deal with batteries or dead "LED/LCD" displays. I pull it out, use the quick connect on this regulator for my air hose and fill my tires. Done. Keep it simple, and extremely dependable while being fully functional.
C
Reviewed in the United States on September 16, 2020
I use this on a 5# CO2 tank for filling my tires after a day of off-roading. I have 33" tires and usually run them around 38psi on the street and down to about 20psi off road. I don't do any major rock climbing or anything so no need to go much lower. This valve airs the tires back up to 38psi in about 12-15 seconds each. After the second tire it tends to get some frost on it and by the time I finish the 4th tire it's pretty frosty and cold. I've filled up approximately 4 times (16 tires total) without any issues at this point. Valve seems well made and gets the job done.
Ryan Jordan
Reviewed in the United States on August 10, 2020
I will tell you that they have some of the best customer service I have had in a long time. Very quick to respond and knowledge of their product. I will be using over and over for sure. The product is very well made and works great. The package the products the way they should be so that it ensures the products arrive with out any damage. I was able to order everything I needed for my own CO2 air setup for my Jeep. I wheel a lot and wanted something that I could depend on to air up my tires really quick. Cost me half of what the big companies wanted.
Recommended Products
$87.00
$ 42 .99 $42.99