Your cart is empty.
Your cart is empty.HONEYWELL HOME CT33A1009 Economy Non-Programmable Thermostat - Millivolt Heat Only
David Lane
Reviewed in the United States on February 18, 2025
I have purchased a large number of thermostats for my williams wall heater and was hoping the millivolt version would be better, but after only 4 months it is not longer working properly. I am ordering another brand this time.
Ga Joe
Reviewed in the United States on January 16, 2025
Replace old thermostat for our gas log stove .... works great..
Ray
Reviewed in Canada on September 9, 2024
It was easy to install and is working fine for my gas fire place. It's hard to find 750 milivolt stats in my town but found it at Amazon. Even home depot did not have them in my town.
Gary T Nordby
Reviewed in the United States on June 3, 2024
It works ok but seems like there is a wide range from where it turns the heat off and on so it gets pretty cool before it kiks in then to warm before it turns the heater off
Steve Kerr
Reviewed in Canada on May 18, 2024
Works with my millivolt gas fire, I will use it as an emergency heating source in case my furnace stops working while I'm away in the winter
Customer
Reviewed in Canada on December 3, 2024
Il est arrivé rapidement il fonctionne très bien j apprécie mon achat
Kelby
Reviewed in the United States on December 17, 2024
Fireplace was taking forever to kick on. Tested and determined the old dial thermostat wasn’t working properly. Got this to replace it as I needed an millivolt thermostat and couldn’t find one at the local big box store. Easy to install, looks good, works great. Can’t beat it for the price
Bette365
Reviewed in Canada on November 25, 2024
This replacement thermostat was easy to interchange with my old one.
L-Squared
Reviewed in the United States on October 31, 2024
Easy to use and install. Better than using a manual switch or battery operated digital thermostat.Battery free, analog controller for millivolt system. Don’t forget to remove the tiny piece of cardboard between terminals; otherwise,contacts will never close and fireplace will not ignite.Cons: doesn’t operate off wifi.
sgtslag
Reviewed in the United States on February 16, 2023
Connected it to a fireplace in my living room. Originally, the fireplace had an on/off wall switch. Now it has this thermostat controlling it, automatically. Much better!The temperature markings are way off: I set it to 68 F, and then I let it run for an hour. I used a laser pointer thermometer to check the carpet: 78 F! The furniture, eight feet from the fireplace, was at 78F I adjusted the temp bar down to 66, and the fireplace turned off. I will continue to adjust the temperature setting slider, until the room is just right. Not a big issue for the cost of the unit. It was super-easy to install, and it works superbly, aside from the temperature markings being off. Would buy it again, without hesitation. I can mark the temp slider, myself. Cheers!
TLD 2018
Reviewed in the United States on December 31, 2023
A wall gas furnace is all we have for a home built in 1940. The furnace HEATS the house perfectly. (better than my neighbors forced heat system)Originally, we used a digital wall thermostat that wouldn't regulate the heater properly nor "click" the heater on when set at a particular temperature.This type of product was recommended by our local gas company. Once the temperature is set it's been working perfectly. No it isn't like NEST, have time schedule or hi-tech capabilities. It's OLD SCHOOL - Easy to install, doesn't protrude from the wall mount and when you're cold, you'll need to get up and slide the thermostat to the desired temp. Works as described and to our needs.
D Homey
Reviewed in Canada on December 31, 2023
Worked great for my older gas space heater.
Customer
Reviewed in the United States on December 15, 2023
Gets the job done at a reasonable price.Update....... Bought 2 that time. The second one didn't work. Part of the thin metal component that comprises the contact points was bent in such a way that it wouldn't make contact. I bent the thin metal part of the component to a position that would make contact thus completing the circuit and start the wall heater. I'm sure the calibration is way off but at least it's working. No customer complaint yet. I just ordered one this time and I'll check it over carefully before I install it. I hope that one was just a fluke.
Recommended Products