Shopping Cart

Your cart is empty.

Your cart is empty.

HTP Argon CO2 Mig Tig Flow Meter 0-4000 PSI Precise Gas Welding Regulator 10-60CFH Adjustable Argon Regulator Copper Flowmeter Gauge for Argon Helium Nitrogen(yellow)

4.8 (2) Write Review
Free shipping on orders over $29.99

$19.99

$ 8 .99 $8.99

In Stock

1.Color:Yellow


  • (*^_^*) [Suitable for Mig and Tig Welding] Our HTP flow meter is suitable for Mig and Tig welding. The flow meter is more precise than flow meter regulators. Pressure gauge shows the amount of gas remaining in the tank from 0 to 4000 psi.
  • (*^_^*) [After-sales] If you have any questions, please get in touch with us, our service team will provide you with a professional and satisfactory service.
  • (*^_^*) [Easy to Use] Our flow meter is that the outlet will fit a male 9/16inch x 18 nut or a female 5/8inch x 18 fitting. It is equipped with a standard 1/4inch barb fitting. If you have a welder, the gas hose from your machine should be screwed on the right side as they should use 5/8inch x 18 Male head.
  • (*^_^*) [10-60CFH Adjustable] The output flow is adjustable from 10 to 60 cfh (cubic feet per hour) and is represented by a ball that moves up and down in the flow tube. This flow meter can deal with MIG and TIG welding of steel and aluminum.
  • (*^_^*) [Scope of Application] This flow meter does not use a diaphragm, which is more reliable than flow meter type regulator. This is a CGA-580 accessory, which is suitable for all argon, helium, nitrogen, and argon/carbon dioxide mix tanks. It does not apply to CO2 cylinders.


Parts List:
1×Air Outlet Connector
1×Air Outlet Tower
1×Pressure Reducer
Product Specification:
Product Name: HTP Argon CO2 Mig Tig Flow Meter
Material: Copper
Product Length: 162mm
Color: Yellow
Notes:
1.There may be slight differences between the picture and the actual color of the commodity. We will try our best to show you the exact color.
2.Please allow slight dimension difference due to manual measurement.


Old Man in the Cave
Reviewed in the United States on March 19, 2025
This Abizarch brand flowmeter for Argon or CO2 for MIG and TIG welding looks to be a high quality product. I took welding classes decades ago for stick and gas, and haven't done any in a long time. I recently acquired a welder that can do Mig and Tig, and I'm adding the pieces to make that happen. As an experienced machinist, the machining on this flowmeter is expertly done, and I have every confidence that this flowmeter will perform as expected. If it does not, I'll come back to this review and let you know.
James Konoplisky
Reviewed in the United States on March 18, 2025
If you need a flowguage for your MIG or TIG welder, you can not go wrong with this very nice all brass unit.The price is crazy low, so nothing holding you back!