Your cart is empty.
Your cart is empty.Product Description
Quality and Reliable
compatible with P1300-PART-13-KEY 3/8'' Square hydrant key, Silver Finish metal structure, which is durable, not easily broken, Long service life.
hydrant wrench size
The total length of the water spigot key is 3.23'', the Length of parallel sides within a small square: 0.32'', the Length of parallel sides in a small square: 0.47''. The total length of the Z1320 key is 3.23'', The total length of the Z1320 key is 3.23'', the length of the parallel side inside the small square: 0.32'', the length of the parallel side of the inner square: 0.52''.
Small and portable
P1300-PART-13-KEY hydrant key is compact and lightweight, Easy to carry in storage case.
Widely used
P1300-PART-13-KEY 3/8'' Square water valve key is used to open/close wall hydrants, faucets and outdoor hose valves, This hydrant key fits onto the square head of the hydrant to turn the valve, faucets, etc.
bouncygoat
Reviewed in the United States on March 8, 2025
I had lost the key to my spigot a while ago and the prior replacement key that I bought didn't fit. I didn't realize at the time that there were different sizes. I figured there was one standard and I was wrong. Saw this key on Amazaon, eyeballed it against my spigot, did some crude measurements with a tape measure and rolled the dice. It is a tight fit. I might sand down the outside of it to make it slip in a little easier. But it works. So I'll be able to use a spigot that I haven't used in years.
Heath Detweiler
Reviewed in the United States on January 6, 2025
These lets work just as they should. Seem to be made or some solid material—steel, aluminum, etc and should hold up a lifetime. We need one for our house. It was built in the 60s with no main water shut off in the house so we need these keys for emergencies. They work as they should and we are happy with them.
Ryan
Reviewed in the United States on January 17, 2025
Keys are perfect size and have a hole in the handle so you can hang it on a nail nearby.The construction feels like basic cast metal, nothing special. I'd be worried about the driver side breaking out after lots of use, but I don't think it will fail anytime soon. The driver side fit perfectly on my standard exterior hose bibb/water spigot. It's a really basic tool and it works perfectly fine. I'm pleased it came in a 2 pack as I always lose small items.Overall I'd be hard pressed to not recommend this to someone who needs a key quickly.
phil
Reviewed in the United States on January 14, 2025
Key itself is cast from a solid metal that should last ages.Avoid making my mistake, which was not paying enough attention to the depth of the key. The square part in my hose bib only rises .25 of an inch. Would need to be much taller for this key to work. Since I have it now, I plan to trim the 'too long' end off of the socket with the dremel tool so it reaches.If you have the taller square piece in your hydrant or hose bib, this key should work great for you.
Recommended Products