Your cart is empty.
Your cart is empty.Product Description
iFixit Screen Digitizer Compatible with iPad 6 - Fix Kit - Black
Replace a scratched or cracked front glass digitizer on your iPad 6. A new screen and digitizer assembly will renew the appearance of your front panel and restore touch functionality
Kit Contents
- New Screen With Adhesive Strips compatible with iPad 6
- iOpener Toolkit
This fix kit includes iFixit’s reusable iOpener to aid your disassembly. Heated in your microwave and applied to your device, the iOpener softens the adhesive holding your device closed.
iOpener Toolkit includes:
- iOpener
- Spudger
- Opening Tool
- Opening Picks (Set of 6)
- Plastic Cards
- Battery Blocker
- Suction Handle
- Tweezers
- Precision Bit Driver with Integrated SIM Eject Tool
- 4 mm Precision Bits: Phillips #00, Flathead 2.5 mm
E
Reviewed in the United States on February 29, 2024
I have seen iFixit online for years but this time when my digitizer broke, I decided to save some money and repair it myself. All the tools are perfect and worked perfectly. The digitizer has no dead spots and was very easy to install. It also came with a really cool sticker sheet!!! Only think I think they could include is some Kapton tape to assist a little bit with the process.
Tyler Nowlin
Reviewed in the United States on December 29, 2022
Would like an included adhesive strips for the replacement. Works great!
Koren
Reviewed in the United States on April 29, 2022
The kit + the videos available do work... but there are some things that should be mentioned (at least from my experience)My original screen was shattered in places. This heating pad and prying tools/triangles to hold worked great on the section that was intact. The shattered edges were not so easy to get off.Be gentle. The ribbon cable holders are fragile and don't feel like they could take much pressure so very gentle movements of those holders is needed or else the repair may become impossible without replacement of those parts.Be patient. I sadly was rushing and didn't get all the cords tucked properly and I ended up shattering the new screen with too much pressure on a raised point. In the end the parts of the screen that I didn't shatter worked as expected.
Brandon M.
Reviewed in the United States on May 1, 2021
This is not a difficult fix for technician of any field with even minimal experience. Take your time, follow the online instructions, realize that many parts are tiny so readers for older folks are a must and a magnifying glass is a definite plus for anyone. The warming tool worked well, I had a heat gun standing by but did not need it. In my case, the glass was partially separated to begin with.One thing was there were supposed to be two Phillips head screwdrivers according to the online instructions; the kit had one Phillps which worked for everything and one regular that I never needed.Take the time to remove the old glue carefully with isopropyl alcohol so the new glue will stick.I was dissapointed that there was no new glue strip for the home button. Could have used that!
Recommended Products