Your cart is empty.
Your cart is empty.Product Description
IVYX Scientific Digital Laboratory Water Bath
A versatile, simple to use laboratory water bath
This small and simple lab water bath can be used for all your laboratory purposes. Just plug it in, press the power button, set the desired temperature and the unit immediately starts heating up with a powerful 200W heater.
Specifications
- Max volume: 660 mL
- Temperature range: 20°C to 100°C, in 1°C increments
- Temperature fluctuation: +/- 0.5°C
- Rated Power: 200W
- External Dimensions (without cover): 7.5x5.5x6 in
- External Dimensions (with cover): 7.5x5.5x11 in
- Internal water vessel dimensions: 6.5x4x4 in
- Weight: 2.1 lbs
Super simple to use
Just press the Power button, then + or - to set desired temperature. The water temperature is clearly shown on the digital display.
Small footprint
Its small footprint enables it to be placed anywhere, with external dimensions of 7.5x5.5x11 inches with the cover on, and a weight of 2.1 lbs.
20°C to 100°C
A wide temperature range from 20°C to 100°C (68°F to 212°F). The temperature is controlled in increments of 1°C, and is stable within 0.5°C once the set temperature is reached.
Quiet but powerful
No fans or moving parts make this water bath extremely quiet. Yet its powerful heater outputs 200W, ensuring a fast ramp up to the desired temperature: 20°C to 37°C in just 10 minutes.
Tastey Bitz
Reviewed in the United States on February 21, 2025
Awesome tool for parents. We have two infants in the home and this is an immense time saver not only in the hearing time for a bottle itself but for keeping them from waking each other up. Just grab the bottle and they are being fed.Fits all narrow bottles. Will fit Tommy Tippee bottles as well. Have used it daily,12-14 hrs a day for 2 months straight. No issues. Great value for the cost to me. So much so we bought a second one. Tired of moving the one around daily.
Customer
Reviewed in the United States on January 4, 2025
Did not work right out of the box. Support tried to help but had no ideas. This is going back.
Carlos T.
Reviewed in the United States on September 20, 2024
The media could not be loaded.
Donal Murtagh
Reviewed in Sweden on July 2, 2024
Works as expected
Roser
Reviewed in Spain on May 1, 2024
Lo utilizo para formulación cosmética. He hecho mediciones y las temperaturas que da son correctas. Se pueden utilizar dos vasos de precipitados como maximo de 250ml. Muy contenta
Yvonne Smith
Reviewed in the United Kingdom on December 30, 2024
Good product
Francesco I.
Reviewed in Italy on April 3, 2024
garantisce performance elevate scalda velocemente è tra i pochi a raggiungere i 100°C.sono molto contento del prodotto e del servizio.
Skarmed
Reviewed in the United States on April 25, 2024
Excelente producto
spartandoc
Reviewed in the United States on April 22, 2024
I needed a small cook pot with a digital thermostat for some of our denture making procedures in our dental office. Official dental cook pots at over $600. This one works just fine for what we need and is very easy to use.
Tian
Reviewed in the United States on September 20, 2023
5 stars for customer service. Product works. You do need to remember to press/reset every 12 hr to prevent the auto shutoff
Mike169
Reviewed in the United States on June 25, 2023
I bought this to use to treat an injured finger joint that needed cold/hot water therapy. The hot water is supposed to stay in a range of 110 - 115 degrees. The first few times I used it, I checked the temp with a ThermaPen thermometer (very accurate) and it was dead on the temperature I set it for. It continues to work perfectly for the purpose I bought it for.
Joe
Reviewed in Canada on January 28, 2023
I use this small heater at my work lab to heat solutions to specific temperatures for testing. Can heat up to 100C in under 10 minutes. Best to use distilled water in these to prevent calcium buildups.
Mike C
Reviewed in the United States on April 8, 2020
This does just what I wanted, which is to heat beakers of gelatin solution. I was looking for a cheaper alternative to a glue-pot. It is simple to use. I have not checked the temperature reading against a thermocouple so I can't vouch for its accuracy but it holds the indicated temperature quite well.My strong impression is that this is a re-purposed baby bottle warmer. Those can be bought for a little less than this, but I don't know if they are continuously adjustable between ambient and 100 C or if they have set temperature points. In any case, the cost for this is still reasonable.
Recommended Products