Your cart is empty.
Your cart is empty.Product Description
Long Lifetime
Made from high strength forged steel for firm and durable, without the problems of broken in half, stripped the filter housing etc.
Durable
4.6mm thickness metal around the square hole. NO MORE CRACKED when you try to twist it hard.
To get an oil filter cap which will definitely fit your vehicle, the best way is to make sure it is identical to your current oil filter.
1st. Count
Count how many flutes your current oil filter has.
2nd. Measure
Measure the oil filter from edge to edge.
3rd. Check
Check our measurement graph to see if this one fits your vehicle.
4th. Buy
For example, if your oil filter is 75.94mm with 12 flutes, then 76mm x12 flutes oil filter cap wrench will fit.
Inline3
Reviewed in the United States on February 24, 2025
Attached to wrench, removed filter w/o issue, not much else to say. Works great.
R D. Grayson
Reviewed in the United States on September 25, 2024
This was a lifesaver. It is small enough to fit in the limited space I had to remove the filter through. The closest thing to a problem was the replacement filter didn't fit it. That was not the tool's fault. Manufacturers should start putting the size/number of faces in the filter description. I have now ordered a whole set of them so I am ready for any project.
Ryan
Reviewed in the United States on August 26, 2024
Works for its intended purpose. I would prefer it to fit the filter more snug but I haven't had any slips.
Malkuth L Frahm
Reviewed in the United States on May 13, 2024
Everything in this listing is accurate and it is a great value product. I failed to pay attention to the fact that my filter is 14 flute, flat sided so didn't fit this tool at all, being 12 fluted... That's on me.
GS
Reviewed in the United States on March 22, 2024
Needed for my 2013 BMW 1200 GSA. It fit perfect and was way less expensive than buying it from BMW. I only needed this tool for a one time use because the BMW shop only installs BMW oil filters. I'm changing the oil myself this time and switching over to a K&N K-164 filter that has a nut welded to the filter making it super easy to remove. K&N good stuff.
Noah
Reviewed in the United States on November 9, 2022
Buy it, it's cheap. I think Harley charges like $30-$50 or something crazy for this thing. I bet it's probably from the same manufacturer anyways. It's decently hard to ensure tightness without this little gut and you risk scratching your chrome filter. Worked as it should and got it nice and secure without damaging. Aside from the debt I put in it before buying it. Fit really snug as well. Stop reading reviews and giving yourself a headache. Just buy it. Seriously if you keep reading this and haven't bought it your not going to. Buy it fool. BUY ITTTTTTTTTTT. Thanks for coming to Ted talk reviews.
Luis Enrique Franco Garcia
Reviewed in Mexico on June 25, 2020
Excelente producto
BobJ
Reviewed in the United States on July 20, 2019
This does fit BMW filters, it just depends on who makes the filter. I have a '14 RT. When I put a Mahle filter on in the past I needed a 76mm x 14. I've used HiFlo filters before and it used that same 76mm x 14 but they must have changed their design because this time that size filter wrench didn't work, I needed to buy this one. I even called the company and they said the OEM filter wrench should work, it did not. The difference is the number of flutes, 14 vs 12 but you also have to look at the filter. If it has flat sides, count them, if it's 14 then this wrench won't work. If it has 12 sides, are they flat or are they vertical grooves? If they're flat, this one won't work. If they're vertical grooves then this one should work. It was perfect for the HiFlo HF 164 I just installed. It seems well made and I expect it to be around longer than me and I would recommend it.
Photographer
Reviewed in the United Kingdom on March 18, 2019
Did its job and did it well ... great product.
Perfab
Reviewed in Italy on September 18, 2018
Comoda, sicura e perfetta. Ha un incavo che permette di non toccare la testata in fase di smontaggio del filtro. Materiale robusto e ben rifinito. Consigliata.
Jerry
Reviewed in the United States on May 27, 2018
The KiWav BMW oil filter wrench does work on the R9T Scrambler, both in removing the Mahle (dealer installed) and fitting the OEM BMW filter. However it will try to slip if upward pressure is not held tightly during remove and install procedure. The cap wrench appears to be die struck and is ever so slightly oversized. Will likely try the billet tool and keep this one as a spare.
tangerinedream29
Reviewed in France on August 22, 2016
clé filtre en métal ne se tord pas comme leur homologue en plastique et deux à trois moins cher que chez le concessionnaire et bonus selon votre voiture cette clé peut vous être utile
LUIGI
Reviewed in Italy on October 22, 2016
Come da descrizione, non ho avuto nessun problema a svitare il filtro olio della clio 4.Ricordatevi che Vi occorre anche una prolunga di circa 40 cm. da abbinare alla chiave, vanno bene anche 2 prolunghe quelle presenti nelle serie a cricchetto con brugole/boccole intercambiabili (per intenderci presenti nelle valigette piccole) da officina reperibili in negozi cinesi a modiche cifre.Buon divertimento.
Recommended Products