Your cart is empty.
Your cart is empty.Now you can add filters to your RX100 VII or RX100 VI with no vignetting through out the entire focal range. Only the tiny receiver stays on the camera (it adds only 3mm to the depth of the camera). The filter/filter holder assembly bayonets onto the receiver for quick changes without having to thread the filter on and off. The filter holder is retained by a low tension locking system, so very little torque is applied to the lens barrel when attaching and detaching it. There is no chance of flash blockage at any focal length (with the filter holder removed), since the receiver is the same diameter as the end of the lens barrel. The receiver adds only 3mm (about 1/8") to the total depth of the RX100 VA camera. It attaches to the camera using a 3M dual-sided adhesive film which holds tenaciously yet is easy to remove cleanly and safely when desired. We designed the system so that the filter remains in the filter holder and is attached/detached as an assembly. The filter holder bayonets onto camera with less than 90° of rotation to the locked position. The low tension locking system assures that the lens barrel won't be harmed by over-enthusiastic tightening (or loosening) of the filter. The ability to quick-change the filter in changing light conditions without having to thread/unthread should appeal to filter users. You may use 2 filters at a time, if one is a low profile polarizer.
Abdulelah mohammed
Reviewed in Saudi Arabia on July 31, 2024
الغراء لا يثبت والقطعة تحسها رخيصة جداً على طول طاحت اول ما ركبتها
DeAnna D Evans
Reviewed in the United States on October 22, 2024
I jumped on this as I wanted a way to use filters with my recently purchased camera & to protect the lens. Two days into a 3-week trip: I took my camera out for the day in a very small pack. There wasn't much movement of the camera in the pack as the pack was small. But when I returned to my room this evening the device was detached. I wonder if it would have worked better if I had kept my camera in a very small confined case (butis there a case that works with this camera when this device is on?). Perhaps so. I would recommend that people try keeping their camera in a small case (if it exists) when not in use. That might help. Don't know if I will purchase another device to test this idea. But I am currently overseas so wouldn't be able to replace it now even if I wanted to. I have applied small strips of duct tape (never leave home without it!) as a hopeful fix. Will see how this works tomorrow ...
Craig Lenz
Reviewed in the United States on April 16, 2021
Total and complete waste of money. Lens receiver does not stick to camera lens - detaches when you try to unscrew the filter. Installed very easily without any difficulty, but adhesive absolutely does not hold. Don’t waste your money on this inferior product. Very disgusted.
Customer
Reviewed in the United States on March 5, 2020
I feel this is a $15 product but works well. My main reasons for purchasing were to protect the front casing that surrounds the lens cover as after owning a couple RX100”s the front cover starts to fail closing and opening due to the front cover being damaged dented unnoticed. If you had a couple of these you must of experienced this at some point. If you have this problem inspect closely and I bet you’ll see the front metal casing have some sort of dent. How this happens I’m not exactly sure but my guess is when storing or packing with other photo gear it’s possible the front area of camera is sensitive Little impact causing unnoticed dent or damage around the front lens .This dent disrupts the closing of the lens cover which is common in the RX100 . Buying this protects that area and prevents this from happening saving a costly fix. A bonus is that I get to add filters. I highly recommend if you have an RX100
Mark R
Reviewed in the United States on July 28, 2019
I bought this filter adapter for my Sony RX100 VI but ended up returning it when I learned from the Lensmate site that Part 1 (the part that attaches to the front of the lens barrel) causes a small amount of flash blockage between focal lengths of 24mm and 28mm. Since I use my flash frequently and I couldn't be sure when the flash blockage might be an issue, I decided to return it. Since it otherwise seemed like a quality product, this issue shouldn't be a deal breaker if you don't use your flash a lot at wide angles or if you don't mind a small shadows at the bottom of your images if you do.
ken logsdon, jr.
Reviewed in the United States on July 1, 2019
applied easily, holding fast. great adapter to then add 52mm filters and additional lens cap. filter not included but i have stacked several macro filters together and it still holds. nice addition to rx100 vi camera to extend the range and usability of the lens.
Robert Rosenbaum
Reviewed in the United States on October 14, 2019
This product is terrific. It transforms the Sony RX100 from a very good travel camera to something very very close to a replacement for an APS-C like the 6400 (which I’ve owned) and - dare I say it - even the A7iii (I’ve compared images from both). Of course the IQ of the larger sensor cameras is better, but since I’m not going for professional level print output, the lightness and smallsize makes the RX100 better for me for travel.I do mostly landscape photography and had missed the ability to use ND filter to smooth water flow and polarizer for skies and ice glare - post-processing gets close, but doesn’t do a good a job. Now, with the lensmate, I can do both. VERY satisfying.I can’t vouch for its long-term durability but on a one-week trip to Iceland the Lensmate system worked very well. I’d advise getting additional adapter rings for all your most-used filters, then you can just bayonet them on and off.Thanks, Lensmate!
Dave
Reviewed in the United States on April 14, 2019
It is a good product given that there are not many options for filter attachment solutions to a point-n-shoot.If you live in a hot environment and you're constantly swapping filters or you use a variable ND filter you WILL eventually wear down the adhesive. If you have the camera baking in a warm car, it will come off on the first twist of the adapter. When it comes off once entirely and you have to haphazardly realign the filter on the field it will never stick as strong as it did when you first installed it. Lensmate does provide replacement adhesive but I have not ordered them. Most likely it is the exact same adhesive prone to softening to heat.Edit: The replacement stick-on adhesive rings are strong as it was brand new.
Goose
Reviewed in the United States on October 13, 2018
I originally installed the official Sony filter mount but it wasn't the right fit so at the widest angle, it showed in the corners because it's only for older versions of the camera. This one, however, is shaped to not do that. In addition, the ring locks in place so unlike the official Sony mount, you can just turn your filter (CPL or variable ND) without having to hold the mount in place too which is very helpful. It's not a Prime item so it'll take an extra day or so to arrive but definitely worth the wait.
Recommended Products
