Shopping Cart

Your cart is empty.

Your cart is empty.

LPD47391 40k Transmission Oil Cooler Kit Compatible with Heavy Duty 40,000 GVW Max, Low Pressure Drop LPD47391 with Mounting Hardware

Free shipping on orders over $29.99

$64.99

$ 30 .99 $30.99

In Stock

About this item

  • 🔧 [FUNCTION] - The LPD47391 40k Transmission Cooler Is Recommended For Towing, Daily Driving Trucks and Suvs, High-Performance Trucks. It Is The Ultimate Cooler For Heavy-Duty Towing and An Essential Product For Heavy-Duty Applications (Including Racing)
  • 🔧 [NOTE] - LPD47391 40k Transmission Oil Cooler Has A Rated Gvw of 40000 and Dimensions of 8.5 "X22.75" X1.25 ", 3/8". This Is A Stacked Board With A Low-Pressure Drop Device
  • 🔧 [OE] - LPD47391 47391
  • 🔧 [HIGH QUALITY] - 47391 40k Transmission Cooler Features A Durable Brazed Aluminum Structure, Precise Fin Spacing For Efficient Airflow and Cooling, Long Service Life, and Ultra-High Cost-Effectiveness
  • 🔧 [BRAND PROMISE] - Lifetime Warranty, Worry-Free After-Sales Service. We Hope That Gelessy Can Make Your Shopping Experience Enjoyable. Feel Free To Contact Us If You Have Any Problems


1 - Transmission Performance Oil Cooler with Mounting Hardware + Bonus Product

2 - This cooler is rated at 40,000 GVW and measures 8.5"x22.75"x1.25". LPD47391.

3 - This is the ultimate cooler for heavy towing and is a must for heavy duty applications, including racing.

4 - Heat is what kills an automatic transmission. If you want to extend the life of your transmission and avoid or prolong a costly rebuild, this is very cheap insurance.

5 - Advanced cooling protection for car, van, light truck, R.V. and towing applications.


Rich Williams
Reviewed in the United States on August 29, 2024
After installing this Tru-cool knock off it is performing well and has dropped my 6L80 transmission temp an average if 30 to 40 degrees. While pulling a 7000lb boat with outside air temp around 90 the temp never got above 160. HOWEVER I would strongly recommend that you DO NOT use the cheap non rated hose included. After two weeks it randomly ruptured and left me stranded after I discovered the leak. It dumped about a gallon of fluid on the road before I noticed the transmission slipping. Luckily I was able to immediately pull off the road and shut down. I had to get a tow home. Get a $10 section of J2076 oil rated hose from your local parts place. I should have known better so you've been warned!!
Steve Moody
Reviewed in the United States on August 1, 2024
Install this and those days are gone. I installed before last trip to mountains pulling a trailer. In the past I would see temps of 220-230 degrees on the transmission. Highest I ever saw this past trip in miserable outside heat was 194 degrees. Longest transmission life comes with keep it just above 160. Without a load or super steep hills I routinely run about 162 degrees with this on a 2007 Suburban with 4x4 and 5.3L engine. Do it, it will save you money on powertrain repairs...
nick Ferry customer nick
Reviewed in the United States on July 14, 2024
I replaced my factory cooler with this for a upgrade as the transmission is just rebuilt.
Mariina Alonso
Reviewed in the United States on October 30, 2024
Just installed 10/27 no leaks so far but the fins are extremely fragile several bent with the water hose pressureUpdate as of Feb 8th the oil cooler failed on me . The sides started leaking a large amount of oil between the fins . This wasn't dropped but it looks like it caved in in the center somehow .when it worked it worked great but not at the expense of almost losing a transmission and replacing the trans fluid
Derek Baumgardner
Reviewed in the United States on April 12, 2023
The media could not be loaded.
Mr.Dustie
Reviewed in the United States on September 21, 2022
Got this thing as a temporary replacement until i got the new TRU COOL MAX 40,000 GVW Transmission oil cooler low pressure drop & turns out to be same exact unit only half the price. This thing works keeps trans oil at 130° & before it was at 190°/200°. You do the math glad I got this
David
Reviewed in the United States on June 10, 2022
Product showed up with minor fin damage taking 15 to 20 minutes to repair.Most people would have simply ignored it as it was small, but I’m a perfectionist. The fitting size is a mystery, could be 11/16-18 or 17, possibly 18mm 1.5When I have determined the proper fitting I will update this review to help others with installation who want a more professional look installation than patching in rubber hose. I plan to use -6AN fittings and anodized aluminum tubing custom fit with no rubber to decay over time.
Stephen Saint Clair
Reviewed in the United States on November 30, 2022
I put a diverter on the supply line and can use either the rad or the cooler. I installed a temp gauge and can see the rad reaches 190°F- 220°F but switch to the cooler and it doesn't budge off of 100°F
Recommended Products

$208.78

$ 99 .00 $99.00

4.9
Select Option

$37.99

$ 19 .99 $19.99

4.3
Select Option

$102.79

$ 47 .99 $47.99

4.3
Select Option