Your cart is empty.
Your cart is empty.Product Description
Before purchasing, please note the difference in appearance between KSD301 and KSD302.
Before purchasing, please note the difference in appearance between KSD301 and KSD302.
KSD301 temperature control switch is a flat leg movable ring
KSD302 temperature control switch is a curved leg fixed ring
- Normally closed: The temperature control switch is in the working state (passage). If the temperature exceeds the temperature control temperature, it will trip (disconnect) and not work, such as an electric kettle.
- Normally open: The circuit is open (not working) when the temperature does not exceed the temperature control temperature. It will only start working when the temperature exceeds this temperature.
- Product name: Thermostat Temperature Control Switch Temperature Controller Adjust Snap Disc Temperature Switch
- Model:KSD301/KSD302
- Body material: bakelite, ceramic
- Switch type: normally closed
- Working voltage: 110V, 250V, 400V (V)
- Overload current: 10A, 15A, 20A, 40A, 60A
- Operating temperature: 0 degrees to 300 degrees (℃)
- Lifespan: 50,000 (times)
- Since it is a mechanical switch, according to industry regulations, every 5°C is a step.
Features
It has the characteristics of stable performance, high precision, small size, light weight, high reliability, long life, and little concern about radio interference.
Precautions
- When using contact temperature-sensing installation, the metal cover should be close to the installation surface of the controlled appliance. To ensure the temperature-sensing effect, thermal conductive silicone grease or other heat-conducting media with similar properties should be applied to the temperature-sensing surface.
- During installation, do not collapse, loosen or deform the top of the cover to avoid affecting performance.
- Do not allow liquid to penetrate into the interior of the thermostat, crack the shell, or change the shape of the external terminals at will.
- When the product is used in a circuit with a current of no more than 5A, a copper core cross-section of 0.5-1㎜2 should be selected for connection; when used in a circuit with a current of no more than 10A, a copper core cross-section of 0.75-1.5㎜2 should be selected for connection. connect.
- The product should be stored in a ventilated, clean, dry and corrosive gas-free warehouse with a relative humidity of less than 90% and an ambient temperature of less than 40°C.
Jorge Rodriguez
Reviewed in the United States on April 23, 2024
Bastante presión
Customer
Reviewed in the United States on June 21, 2022
China
Scott Bialek
Reviewed in the United States on November 27, 2021
Didn't need 5 but had little choice. Charged a lot for shipping
Recommended Products