Your cart is empty.
Your cart is empty.Backed by superior materials and rigorous testing, MOOG® Problem Solver® vertical control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Ryan Jeffries
Reviewed in the United States on June 16, 2024
Just before I begin, these are compatible with the 8th gen Honda Civic, but Moog recently came out for one specifically for our cars with the part number K201884. I installed these right before those were released but they are still proven to work just fine in our cars. The main difference is that the metal body is longer on the 8th gen, so when pressing these bushings in, there will be a ~1/4" gap on the bottom of the arm (The overall height and position of the inner rod will still be the same). Doesn't affect anything structurally.If your car is already modified with upgraded suspension components like mine, the difference in harshness is almost negligible from OEM. The only time it becomes noticeable is on certain sharper cracks in the road. Maybe on a stock vehicle those become more apparent, but it's more of an increase in road noise than any harshness or stiffness.
David M. Nelson
Reviewed in the United States on May 23, 2024
I ordered these for a vehicle I have overseas where this type of car part is hard to come by. I had been experiencing a distinct rattle from the front suspension for quite a while when I realized that this was the part that needed to be replaced. Installation was easy and fast, and the part fit perfectly. I'm happy to report that this took care of the suspension rattle problem, and I have much more confidence driving the vehicle now.
Jacqueline
Reviewed in the United States on September 27, 2023
I put in on my 2005 Honda dev I don’t write reviews bc I am always busy but for this one I make time 10000 miles and have move a bit really good and strong
Michel Alejandro Mireles
Reviewed in Mexico on March 31, 2023
Muy buen producto lo recomiendo antes de instalarlo ya abia remplasado barios amuy corto plaso este adurado mucho solo es un pokito mas rigida la suspensión pero lo recomiendo
BW
Reviewed in the United States on November 13, 2021
Just leaving a review to let you guys and gals know that this fits in 8th gen LCAs. Very popular "budget" upgrade over the OEM floppy rubber bushings, reduces wheel hop and improves handling.
Thien Cao Nguyen
Reviewed in the United States on November 14, 2020
I just received two bushings that I recently ordered. During inspection I notice on the underside, the rubber seal was coming off the metal. You can see it clearly on the photo. I found it on both of the bushings. The spherical bearing is stiff but can move on its axis. Will be getting replacements.
Tomas Ashenafi
Reviewed in the United States on April 9, 2020
Ordered two first, neither fit, then ordered another pair Only the bushing with golden tubing and vintage look fit. gotta return the other three. Tired at this point just gonna buy from advanced auto for twice the price but gonna take the control arm with me and see if it fits on the spot.Also good luck installing strut spacers bigger than 1 inch especially with new struts.
casanezo
Reviewed in the United States on August 20, 2018
I installed these bushings on a 2005 Honda CR-V. Perfect fit for the lower control arms. These Moog bushings are built like a tank and should outlast the car. I have seen reviews where others have complained about the steering feeling too stiff. I did noticed the steering did firm up, but it was just fine. These bushings did replace the 13 year old factory bushings so a firmer ride is to be expected. I have bought Moog suspension parts in the past for other vehicles and have always found them to be up for the job.
Customer
Reviewed in the United States on May 1, 2018
They address the weak/soft factory bushings well. People have mentioned the bushings are stiffer than stock; it’s 100%true. They are almost too stiff but it peice of mind to know they won’t wear out like the factory part.
Recommended Products
